This plate scratch idea is 100% Steve's. From a few discussions we have had I realized that having an identifiable back marking linking a unique card to a specific position on a sheet could provide enough information to determine how many sheets were used to print the series.
If there is an identifiable marking on a back plate and confirmed on multiple examples of whomever is on the front, let's say Bates. We can then look for the exact marking on other cards. If multiple examples of Elberfeld has this same marking, then we can assume that the Bates and Elberfeld are in the same position on a sheet, but are not sheet mates.
If we can do this for several back markings, cataloguing every P150 card with that identifiable marking, a common denominator should show up. This # is highly likely how many sheets were used to run the series. Unless half way through the series they fixed the plates then we are out of luck.
With the number of sheets used in a 150 card series, we can get the number of unique players per sheet....that is if they didnt mess with the configuration and kept to the two rows consistent.
Then we can put together the back markings, two namer and side by side cards and maybe this will be enough to start to place a sheet together.
It is a lot of work to get there.
Last edited by atx840; 02-11-2013 at 10:48 AM.
|
02-11-2013, 10:35 AM
Similar Threads
Threaded Mode