Goudey / T206 Top Loader "Frames"

[slantycouch]

Starting a new thread because I don't want to completely hijack Brent's "Repurposing SGC Inserts" thread.

Cleanly holding T206's and Goudeys in toploaders is a problem that has haunted me forever, it seems. I've been working to get some prototype frames made so maybe I can find the right solution and finally sleep after all these years.

The first version fits into penny sleeve and then top loader. Here's the image I posted earlier:



Feedback seemed to be that black was the choice and it was preferred that the frame better fit the toploader. Next round more fully fits the width and height of the toploader. Here's the image of those for both T's and Goudeys:




Are these better? Would appreciate any thoughts you're willing to give.

I'd also love more thoughts on the size of the cutouts, stock thickness, etc. If anyone is interested in giving me some hands-on feedback, please PM me your addy and I'll shoot one or both your way. Nothing for sale! Just looking for real world insight.

[bnorth]

The only thing I can offer is to offset the hole farther down. That way a label can be put at the top. Avery makes labels that are 1/2 X 1 3/4. I know I personally want to be able to label my cards.

[T206Collector]

I love them. I bought the BCW Tobacco Insert sleeves for my T206s. Those look good, but these take it to another level. This simple insert would really drive up presentation value of the typical top holder. Well done... and where can I get 520 of them?

[Bigdaddy]

What a great way to display and protect a card while keeping it 'raw'.

How thick are the frames? I'd want them to be thick enough to not let the card dislodge from the frame while it is in a toploader.

And if it was shifted down so to leave room at the top for a label, I'd want the label printed with some standard font/design. These frames look professional enough that you wouldn't want a hand written label on them.

Nicely done.

[perezfan]

I prefer them just the way you have them. Perfectly centered, and let the card speak for itself. Perhaps you can create/market both types, based on preference (room for label, or no label).

I have a bunch of raw Goudeys that I would love to display the exact way that you have pictured in the original post.... no penny sleeve and no label. Just beautiful!

[bnorth]

Originally Posted by Bigdaddy

What a great way to display and protect a card while keeping it 'raw'.

How thick are the frames? I'd want them to be thick enough to not let the card dislodge from the frame while it is in a toploader.

And if it was shifted down so to leave room at the top for a label, I'd want the label printed with some standard font/design. These frames look professional enough that you wouldn't want a hand written label on them.

Nicely done.

Avery makes labels so you can design and print any type of label you want on you home printer.

[Georj]

How is the card secured in the frame?

[btryin]

These look great. Would love to get some for T206's once you've perfected them!

[bnorth]

Here are 4 designs. The ones on the left have a mylar sleeve you put the card in that fits into the black insert.

The blank labels are Avery 5422, if you have a home printer can make very nice personalized labels for your cards.

I would like to thank Rick Hyatt tcverify.com for making the DIY kits on the left side. I would also like to thank the OP of this thread for the making the kit on the right without the label. The one with the label is a cut down SGC insert I made. I believe the OP will be making similar kits though.

No matter what design you like I think these are by far the best way to store and display Tobacco cards I have ever seen. So harass the fine gentleman that has the design you like and purchase some from a fellow member.

[slantycouch]

Neat to see them all together, Ben. Is the one I sent too snug L/R for the T210? Does the cutout need to be expanded any?

[bnorth]

Originally Posted by slantycouch

Neat to see them all together, Ben. Is the one I sent too snug L/R for the T210? Does the cutout need to be expanded any?

No they are perfectly sized. The pic makes it look way tighter than it really is.

Having all 4 in hand is nice. It gave me a chance to really see what they are like and what one I like best.

Hopefully both you fine gentlemen sell a lot of them because both are high quality products.

If anybody has any questions on the insert/DIY kits I would be more than happy to answer them.

I am not sure how Chris is going to sell his product. I am sure he will post if he is just selling the insert or is going to make some sort of compete kit or both hopefully.

Rick sells them as a whole DIY kit.

You Get:
Mylar sleeve for the card.
Black insert the sleeve fits in.
Toploader
Toploader Sleeve that is WAY better than a Ultra Pro toploader sleeve.
Plus you get a cool yellow strip of paper that you use to help guide your cards into the Mylar sleeve so no worries about dinging a corner. This is a great all in one product.

[perezfan]

For my collection, I much prefer the example at the bottom-right. Will this style be available for Goudey, in addition to Tobacco Cards?

What a great alternative for people who don't want to wait over 6 months to get their cards, don't want to risk losing/damaging them in transit, don't want other people handling them, don't want to support corrupt/fraudulent companies, and don't need randomly opined numbers and ugly bar codes polluting their aesthetics.

Hope it catches on, and best of luck with this endeavor!

[Oscar_Stanage]

Originally Posted by bnorth

No they are perfectly sized. The pic makes it look way tighter than it really is.

Rick sells them as a whole DIY kit.

You Get:
Mylar sleeve for the card.
Black insert the sleeve fits in.
Toploader
Toploader Sleeve that is WAY better than a Ultra Pro toploader sleeve.
Plus you get a cool yellow strip of paper that you use to help guide your cards into the Mylar sleeve so no worries about dinging a corner. This is a great all in one product.

is there a link or a post where i can look at these?