Grading Question

[John V]

This is not a complaint about SGC. Yes, I'd rather it be VG. I'm just curious to know more about the grading process.
Note the rounded corners on the left side of this card versus the slightly sharper corners on the right side. Does a grader normally view this to be abnormal wear and automatically assume it to be trimmed? According to the Standard Catalog T205s should measure 1 7/16 wide and this one is a hair over.
I would appreciate any thoughts on how this works.

[terjung]

Is there, by chance, any tape on the back? If so, that could be the reason for it.

Look on the website for the grade. I think it (or the slip it came with) should give you a reason for it.

[John V]

Here's the back. No tape. I'll check the website.

[ullmandds]

With that crease...not sure if it would be vg regardless...but...rt side corners...cut look irregular...possible trim.

[Leon]

There was an article written, I believe in the SGC magazine by their owner, talking about how they could identify certain types of edges on T cards (inc. T205s) where they could tell the "roll" of the edge was not a factory cut. Personally, unless I see some waviness it's difficult to tell. I am not a grader though.

[Taxman]

Back left side looks to be trimmed...I stress looks in the scan not saying for sure...but notice the distance between the green border and side of the card varies as you go down the card....This would explain the "A" grade.

[ullmandds]

Agreed...that's what I was seeing...the difference between the edge of the card and the green line on the back scan.

[e107collector]

Originally Posted by Taxman

Back left side looks to be trimmed...I stress looks in the scan not saying for sure...but notice the distance between the green border and side of the card varies as you go down the card....This would explain the "A" grade.

I agree with Taxman.

Tony