T206 Advice Trim?

[fkw]

rounded corner and diamond cut = not trimmed

[rp12367]

I checked and all edges appear to have same coloring/toning and bevel. Guess the diamond cut was playing tricks. Thanks to all for the help... Thx Ralph

[FrankWakefield]

First, I think it's a good looking card.

In my experience, diamond cut cards would have the opposite edges/sides parallel. Were that card diamond cut, the bottom would be parallel to that non-perpendicular top. But it isn't. So I'd not consider that a diamond cut. I know little about grading, other than I don't trust it and don't care for it. It would not surprise me if SGC or PSA considered that card miscut. Not trimmed, but miscut. Again, I think it's a good looking white border tobacco card. If you do send that in for grading, post the outcome in this thread, please.

[T206Collector]

If the only crease is the one visible on the left side of the card in the scan, SGC will put that in an SGC 40 holder. If there are additional wrinkles, it would be either a 20 or a 30.

[rp12367]

Originally Posted by T206Collector

If the only crease is the one visible on the left side of the card in the scan, SGC will put that in an SGC 40 holder. If there are additional wrinkles, it would be either a 20 or a 30.

That's the only crease in the card. I will probably submit to SGC in the next couple of weeks, I have some other stuff to go in as well. I will re-post with update when I get it back. Thanks for the help... Ralph

[ethicsprof]

nice pick up!!!
congrats.

all the best,
barry