|
#1
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
I received this PSA slab from a reputable seller and this is how it looks. |
#2
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: steve f
psa cust service;(800) 325-1121 |
#3
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: scott brockelman
tap the top left corner of the holder on the counter top or desk and the card will probably fall right back into place without all the trouble of sending it in. |
#4
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
You don't think I tried that already? OF course I did. I did it so hard any harder I will break or crack the holder. |
#5
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: mark t
Just be safe and send it back to PSA. if you keep banging the slab on the edge of a table you will ruin the card. By the way , was it sent usps or UPS. If it was USPS then i can see how they would be throwing it around at the warehouse and laughing. |
#6
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
I haven't done alot of banging the card just a few times to confirm what my postion is. I have a stuck card. This was sent by UPS. In a 8x8 or 10x10 cardboard box with 12 others. Padding was newspaper wrapped around the items The card looks like it hasn't been damaged. However I only have a problem with 1 out of the 13 cards. I chose not to contact the dealer since I paid a fair price and this is something I can fix. Also no return policy on slabs. However I may advise him that he can buy bubble wrap to protect future shipments. You can get it in bulk rolls for cheap at STAPLES. I believe this may have happened in shipping. No reason to drag a seller through the mud or nothing and I love the card =) |
#7
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: steve f
T206man; No need to get snippy. The guy was just trying to help ya. |
#8
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
PLease, I'm not trying to hurt anyones feelings here. I'm Sorry. |
#9
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Lee Behrens
I would send it into SGC for a cross over. Much better looking holder. |
#10
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Robert {Bigb13}
I must agree with Lee it will look better in a SGC slab. Plus for vintage stuff SGC is better at grading. Rob |
#11
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Frank Wakefield
It would look best if disenterred from the plastic crypt. I'd hacksaw him out and get rid of the slab. Then there would be no problem with how he sits in there. No postage costs or letters or phone calls. A hacksaw solves all problems. |
#12
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
Problem with the hacksaw is I have no more slab =( Also what if the card is damaged? no more guarentee. I'm gonna call customer service on this one. Thanks for the info guys. |
#13
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Judge Dred (Fred)
Just pry the top and bottom half apart carefully. After centering the card use a little glue and put the two halves together and you're done... holy crap, I just had a great idea. I know how to make money by doing that. I could put sub standard cards in the higher grade holders and make a mint doing so... is this an original thought? I remember "when it was a hobby" that nobody would have even thought about doing such a thing. |
#14
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: T206Collector
You say "disenter the card from the plastic crypt," I say preserve the card's excellence in a manner which presents the card most favorably -- SGC! |
#15
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: ErlandStevens
Could you maybe squeeze the holder a bit while knocking it on the left side? Pressure on the sides might cause the top and bottom plates to separate just enough to let the card slide free. |
#16
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
I think thats exactly what happened. it was a stack of holders when shipped. I personally like the psa look but don't really care either way. I don't collect GAI or BVG though. |
#17
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: leon
Wise man once say... "collect cards not holders".... |
#18
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
I personally think buying raw off ebay is considered gambling just about most of the time. |
#19
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: sagard
Fashion a pad for the left edge of the PSA holder. Then demonstrate your authority over the card and holder. Sadly I'm speaking from experience, but it was a success. |
#20
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: fkw
Now If I had that cockeyed card in that slab, Id bang the sh*t out of it,...... top left corner on a phone book or something not so hard. If the slab cracked so be it, Id then send it to SGC to cross over. Or break it out and keep it raw. Remember its a 3 with corner rounding, not a sharp cornered 8, so it would be tough to knock it down to a 2 unless you creases it or chipped it. |
#21
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: ErlandStevens
I agree that T-cards in PSA's E-card slabs look sloppy at best. |
#22
|
|||
|
|||
Problems with PSA holder and t206 card
Posted By: Anonymous
I've learned more things and like Sgc better than PSA =) nothing else. This is solely because SGC fits your card better than PSA. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PSA Problems | Archive | Postwar Baseball Cards Forum (Pre-1980) | 10 | 04-11-2009 07:37 AM |
f/s or tr t206 huggins port was in psa 3 holder | Archive | Tobacco (T) cards, except T206 B/S/T | 4 | 08-20-2008 08:03 PM |
questionable card in PSA holder in REA sale ? | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 24 | 04-08-2008 07:32 PM |
PSA Holder Problems! | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 3 | 09-22-2006 05:57 PM |
T206 card holder on ebay! | Archive | Baseball Memorabilia B/S/T | 0 | 01-25-2006 03:34 PM |