Hey, pennant guys

[ooo-ribay]

Hey FB Rob - I believe Erik uses water, bleach, water. Not bleach x2.

[Fballguy]

Originally Posted by ooo-ribay

Hey FB Rob - I believe Erik uses water, bleach, water. Not bleach x2.

Yeah but straight bleach is the question.

[ooo-ribay]

Originally Posted by Fballguy

Yeah but straight bleach is the question.

Ahhhh.

I used to use straight bleach until my ‘62 NL Champs disaster (although I think that one was doomed, no matter what).

[erikc21]

Originally Posted by Fballguy

Yeah but straight bleach is the question.

Sorry for once again being unclear!

First, I do hang the pennant (spine-side up) so the bleach runs down away from the spine. I tape the spine with multiple layers of painters tape so nothing accidentally soaks through. I also extend the tape about 1/2 inch lower than the spine to be safe. I also try and make sure the tassels are taped.

I have two spray bottles. One straight water and the other 100% bleach. I first spray the pennant with water to get it wet. Second, I spray the pennant with 100% bleach directly on the front of the pennant. I spray the whole pennant directly. I’ve never sprayed the back of the pennant which is interesting. I let the bleach stay on the pennant for a few minutes. Lastly, I spray with water continuously until the bleach is gone.

I sometimes repeat a time or two. I’m always worried about letting the bleach sit too long as I’ve had a few pennants run or the white turn almost a yellowish color. So, I was curious if this is how others completed the process.

[Fballguy]

Originally Posted by erikc21

Sorry for once again being unclear!

First, I do hang the pennant (spine-side up) so the bleach runs down away from the spine. I tape the spine with multiple layers of painters tape so nothing accidentally soaks through. I also extend the tape about 1/2 inch lower than the spine to be safe. I also try and make sure the tassels are taped.

I have two spray bottles. One straight water and the other 100% bleach. I first spray the pennant with water to get it wet. Second, I spray the pennant with 100% bleach directly on the front of the pennant. I spray the whole pennant directly. I’ve never sprayed the back of the pennant which is interesting. I let the bleach stay on the pennant for a few minutes. Lastly, I spray with water continuously until the bleach is gone.

I sometimes repeat a time or two. I’m always worried about letting the bleach sit too long as I’ve had a few pennants run or the white turn almost a yellowish color. So, I was curious if this is how others completed the process.

Very similar to my process Erik. Main difference is I typically start bleaching from the back. The strength of my mixture depends on how dirty the pennant is.

[ooo-ribay]

Pretty damn nice baseball collection for a football guy!

[erikc21]

Originally Posted by ooo-ribay

Pretty damn nice baseball collection for a football guy!

I know...I told him his second ‘main’ sport is better than my entire collection