Hey, pennant guys

[Domer05]

Originally Posted by ooo-ribay

I wonder if that "velvet-like" feel would be known as "flocking"? Flocking is applying very short fibers to adhesive. I have a similar pennant without the velvet feel. I always assumed mine was 1970s and should have been licensed but was not.

P.S. this is not a pennant you see very often. I can't remember the last one I saw...

If a pennant's graphics exhibit a raised velvet-like feel, then yes this is what they marketed as a flocked pennant. The process was used by a small handful of manufacturers beginning in the 1940s. Two companies in particular made it their signature design element: Collegiate Mfg. Co. and Chicago Pennant Co.

Collegiate of Ames branded pennants made using their flocking process as "Chromtone" pennants and marketed their pennants under this snazzy name. Chipenco followed suit; except they dubbed their flocking method "A Silvet Process." Despite the two names, they made their pennants the same way. Essentially, you screen on a base layer in white that's sticky. Then you dump a bunch of white "flock," i.e., ground felt dust, atop the pennant. The flock is then cured to the pennant via a heat treatment. The excess flock is removed. Finally, the secondary colors are applied via block-out stencils to the design.

The main advantage to flocking is that the graphics will never crack like they will on a screen printed pennant, using screen printer's paints.

Today, Collegiate Pacific still utilizes this premium production method on all of their felt products.

[thetahat]

Originally Posted by Domer05

If a pennant's graphics exhibit a raised velvet-like feel, then yes this is what they marketed as a flocked pennant. The process was used by a small handful of manufacturers beginning in the 1940s. Two companies in particular made it their signature design element: Collegiate Mfg. Co. and Chicago Pennant Co.

Collegiate of Ames branded pennants made using their flocking process as "Chromtone" pennants and marketed their pennants under this snazzy name. Chipenco followed suit; except they dubbed their flocking method "A Silvet Process." Despite the two names, they made their pennants the same way. Essentially, you screen on a base layer in white that's sticky. Then you dump a bunch of white "flock," i.e., ground felt dust, atop the pennant. The flock is then cured to the pennant via a heat treatment. The excess flock is removed. Finally, the secondary colors are applied via block-out stencils to the design.

The main advantage to flocking is that the graphics will never crack like they will on a screen printed pennant, using screen printer's paints.

Today, Collegiate Pacific still utilizes this premium production method on all of their felt products.

Great post Domer ... though I’ll add my 3D Giants and Yankees have light cracking in spots.