July Pick ups

[jason.1969]

Picked this up on the Bay but am suspecting it is a reprint, despite seller assurances.

I had understood Dan Dee to be a thin flimsy card stock with wax/oil residues. Instead this is a sturdy stock similar to Twinkee cards when I was a kid.

[irv]

A couple more arrivals.

So glad to finally get a Chico Carrasquel card. It was a tough one!!

[Vintagevault13]

Originally Posted by irv

A couple more arrivals.



So glad to finally get a Chico Carrasquel card. It was a tough one!!

Nice additions. You are on a good run with your 52's.


Sent from my iPhone using Tapatalk

[irv]

Originally Posted by Vintagevault13

Nice additions. You are on a good run with your 52's.


Sent from my iPhone using Tapatalk

Thanks!

[RayBShotz]

Irv - Impressive. How many do you have now?
RayB

[irv]

Originally Posted by RayBShotz

Irv - Impressive. How many do you have now?
RayB

Thanks, Ray!

I am currently at 265. I started out with 148 when I joined this site last January.
Currently just working on numbers 1 to 310 with no high number purchases, yet.

[savedfrommyspokes]

Originally Posted by irv

A couple more arrivals.

So glad to finally get a Chico Carrasquel card. It was a tough one!!

Nice p/u's Irv, I agree that Chico's card is tough.

Thanks to my quarterly ebay bucks, I finished my 52 low # run and added a few more hi #s.

[irv]

Originally Posted by savedfrommyspokes

Nice p/u's Irv, I agree that Chico's card is tough.

Thanks to my quarterly ebay bucks, I finished my 52 low # run and added a few more hi #s.

Thanks SFMS!

Congrats on finishing your low number set, that's a great accomplishment.

Nice P/U's too!

[brian1961]

Originally Posted by jason.1969

Picked this up on the Bay but am suspecting it is a reprint, despite seller assurances.

I had understood Dan Dee to be a thin flimsy card stock with wax/oil residues. Instead this is a sturdy stock similar to Twinkee cards when I was a kid.

Jason, I hate to say this to you, but I think I can confirm your fears on your Irvin being a reprint. Dan-Dees were printed in sheets, and for the purposes of how they were inserted into the product containers, the cards were die-cut with many connecting tabs, similar to the 1961 Golden Press Hall-of-Fame cards. Genuine cards will have evidence of the many tabs all around it.

I would not guage them as thin and flimsy, but due to the manner in which they were available, many got creased. Part of that manner was it being a single free prize per package, which lent itself to all sorts of extra handling that resulted in creases. At least the paraffin coating protected the card from oil stains and sharp chip gouges---for a awhile!

Naturally, the reprints were not cut the same way, and appear as tab-free standard-cut cards. Furthermore, the reprints, were done in the current standard card size of 2 1/2 X 3 1/2". Genuine Dan-Dees are 2 1/2 X 3 3/4" (according to a Beckett guide of the early 80s), a slightly dissimilar size to the 1954 Topps.

---Brian Powell

[jason.1969]

Originally Posted by brian1961

Jason, I hate to say this to you, but I think I can confirm your fears on your Irvin being a reprint. Dan-Dees were printed in sheets, and for the purposes of how they were inserted into the product containers, the cards were die-cut with many connecting tabs, similar to the 1961 Golden Press Hall-of-Fame cards. Genuine cards will have evidence of the many tabs all around it.

I would not guage them as thin and flimsy, but due to the manner in which they were available, many got creased. Part of that manner was it being a single free prize per package, which lent itself to all sorts of extra handling that resulted in creases. At least the paraffin coating protected the card from oil stains and sharp chip gouges---for a awhile!

Naturally, the reprints were not cut the same way, and appear as a standard-cut card. Furthermore, the reprints, were done in the current standard card size of 2 1/2 X 3 1/2". Genuine Dan-Dees are 2 5/8 X 3 3/4", the same size as the 1954 Topps.

---Brian Powell

Brian, I would trust nobody more than you on a vintage food issue. Thanks...am annoyed with the seller naturally. Will return it.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[Neal]

nice haul guys!
Irv, you have an eye for 52s!

[mrmopar]

I'll have to go and check mine. I don't remember nor did I likely notice "perforations", but then again it seems they are much fewer than I would imagine from Brian's description. Looks like a couple pairs per side.

Originally Posted by jason.1969

Picked this up on the Bay but am suspecting it is a reprint, despite seller assurances.

I had understood Dan Dee to be a thin flimsy card stock with wax/oil residues. Instead this is a sturdy stock similar to Twinkee cards when I was a kid.

Originally Posted by brian1961

Jason, I hate to say this to you, but I think I can confirm your fears on your Irvin being a reprint. Dan-Dees were printed in sheets, and for the purposes of how they were inserted into the product containers, the cards were die-cut with many connecting tabs, similar to the 1961 Golden Press Hall-of-Fame cards. Genuine cards will have evidence of the many tabs all around it.

I would not guage them as thin and flimsy, but due to the manner in which they were available, many got creased. Part of that manner was it being a single free prize per package, which lent itself to all sorts of extra handling that resulted in creases. At least the paraffin coating protected the card from oil stains and sharp chip gouges---for a awhile!

Naturally, the reprints were not cut the same way, and appear as tab-free standard-cut cards. Furthermore, the reprints, were done in the current standard card size of 2 1/2 X 3 1/2". Genuine Dan-Dees are 2 1/2 X 3 3/4" (according to a Beckett guide of the early 80s), a slightly dissimilar size to the 1954 Topps.

---Brian Powell

[Dewey]

A simple add to my Branch Rickey collection. I dig the 60 Fleer set for some reason. Hella cheaper than a 1915 CJ haha.

[bobc88]

I just picked up my first '74 Topps Deckle Edge card. I bought a lot of regular Topps packs as a kid in '74 but didn't know about the deckle edge set until many years later.

filename-1.jpg

[Cowboy Fan]

Some Kaline to upgrade my raw sets.

[Dewey]

Deckled edge. I learn something new every day on net54. Neat card.

Loving those 52s Dale. Such an amazing set.

[irv]

Originally Posted by Neal

nice haul guys!
Irv, you have an eye for 52s!

Thanks Neal.

I am currently waiting for another batch to come in but they haven't arrived yet. I purchased them June 21st. Another batch that I won from the same seller on June 25th did arrive. I am getting a bit concerned.

[brian1961]

Originally Posted by mrmopar

I'll have to go and check mine. I don't remember nor did I likely notice "perforations", but then again it seems they are much fewer than I would imagine from Brian's description. Looks like a couple pairs per side.

Jason and Curt, I'm afraid my memory is not as good as it once was, as there appears on your gorgeous Feller to be only several connecting tabs. The Golden Press have a lot of tabs. Serves me right for not going downstairs and checking my few originals.

Incidentally, Curt, your Feller really is a beaute. There's a decent chance it came out of the find from 1975, the central story of my chapter on the Dan-Dees, in case you're interested. I was at that show! I cannot prove your Feller was from the find, but given the nature of that major occasion, I would say there's a good chance. Great story. Provenance is certainly important when it comes to scarce and rare collectibles such as ours.

All this to say---congratulations on owning one of Bob's finest cards.

---Brian Powell

[rhettyeakley]

Small stack of 1967 Inserts advertising the upcoming Pin-Ups in the next series. I had never really seen these before...

[Bigdaddy]

Two more off the 'Bay to add to the autographed set. Currently sitting at 43/60 with the big ones to go.

[DBesse27]

Wow, amazing stuff fellas! Dan Dees and 52's, Deckles and Topps Giants. Sweet!