Slabs

[irv]

Originally Posted by D.P.Johnson

I seem to recall someone mentioning those screw-down holders can somehow damage cards. That being said, I either buy "raw" cards and keep them "raw" or, if I buy them slabbbed, I keep them in the slab. I like to keep my "raw" cards in those binder sleeves so I can look at them easily...

Originally Posted by Neal

Not a fan of the screw down holders.
I still have a ton of cards in 9 pocket sheets from some binders as a kid. They will stay where they are.
I have yet to crack a PSA or SGC slab, and never would crack one that holds a Brett RC!

I could be wrong but I believe the OP is talking about the 1 screw, not 4 screw holders?
The one screw, from what I know about them, have a recessed area for the card to sit, which of course keeps all the weight off of the card.

If it's the other 4 screw type which squishes the card, then gently does it when screwing them down!

I had my Mantle and Mays in the large 4 screw cubes for over 20yrs and panicked when I read on here what they can do!

Luckily I never screwed them down tight and thankfully I placed them on their side instead of laying them flat as I ha zero issues with them when I removed them from their cubes.

[DBesse27]

When the OP refers to "one inch lucite" holders, I assume he means the 4 screw bricks. The one screws aren't a full inch thick and I don't believe they're made of lucite. If you do mean the 4 screw bricks, STAY AWAY!! Not only can they press the corners and edges, I've seen cases where the card sticks to the lucite and removing it leaves some of the ink behind.

[irv]

Originally Posted by DBesse27

When the OP refers to "one inch lucite" holders, I assume he means the 4 screw bricks. The one screws aren't a full inch thick and I don't believe they're made of lucite. If you do mean the 4 screw bricks, STAY AWAY!! Not only can they press the corners and edges, I've seen cases where the card sticks to the lucite and removing it leaves some of the ink behind.

You're right, Dan. The 1 screw holders are thin compared to the cubes. Hopefully he hasn't screwed them down tight nor laid them flat on their backs for an extended period of time as I believe just the weight of them is enough to cause the sticking.

Mine are now, and have been for a while, in regular card holders with a modified/cut plastic sleeve. (New Vintage holders and sleeves are on order)
Like I mentioned, I panicked when I found out here what they can do!

[KCRfan1]

Originally Posted by DBesse27

When the OP refers to "one inch lucite" holders, I assume he means the 4 screw bricks. The one screws aren't a full inch thick and I don't believe they're made of lucite. If you do mean the 4 screw bricks, STAY AWAY!! Not only can they press the corners and edges, I've seen cases where the card sticks to the lucite and removing it leaves some of the ink behind.

I have seen cards warp too......from personal experience. ugh.

[swarmee]

The problem with them sticking is when moisture gets in and there's no place for it to get out. Plus many boxes of baseball cards have been stored in basements, attics, and garages where they are not weather or temperature-controlled.