Uncut Bowman Sheets?

[toppcat]

Originally Posted by tedzan

Howard Moll (of the George Moll Adv. Agency) told me that all 1948-1952 Bowman cards were printed
using a 38-inch printing press track and were 36 card sheets, configured 9 across x 4 rows.

All 1953-1955 Bowman cards were printed using a 43-inch printing press track and were 32 card sheets,
configured 8 across x 4 rows.


While the 1952-1956 Topps cards were printed using a 53-inch printing press track and were 100-card
sheets configured 10 across x 10 rows.


TED Z

Thanks Ted that is extremely useful information. I do note that the 55-56 Topps sheets were 110 cards but since they are horizontally printed the extra column is really a row and added to the length and not the width of the sheets. It all works out though whether they were 100 or 110 cards I think, per below.

Based upon the above, can we conclude Topps printed 200 or 220 card master sheets like they did later on with two 132 half sheets making up a full 264 Master? The math seems to indicate a double wide Topps sheet was possible if you take the shorter edges and add them up (2.625" x 10 cards = 26.25" + 26.25" plus .50" for the extra space on the left and right gutters equals a 53" double, or master, sheet).

The Bowmans must have had bigger gutters or they (more likely) had the ability to decrease the width of print pass as you could have printed the doubled master as 2.50" x 8 cards = 20" + 20" = 40" plus gutters. Interestingly, you could fit another row in this configuration at a full 43" and and be left with a spare .50".

Here is a 110 card sheet from '56 to illustrate. Note the rightmost column (on a vertically oriented sheet it would be a row) is a DP of the one next to it. A recent major auction also had a 110 card '55 sheet but I can't put my fingers on the scan right now. '53 and '54 half sheets are confirmed at 100 cards apeice and '52 likely is as well, even though I have only seen 5 x 5 card quadrants from that year. Topps must have gone to a new press in '57 as two double wides and gutters are about 55.5" across using 11 card columns at 2.5" per column of cards with 132 card half sheets. Maybe this is when they started using Zabel Brothers of Philadelphia to print cards? Or they could have printed single wides consisting of 12 cards at 3.5" across on the long edge, resulting in 42" of printed area plus gutters, which would have been possible on the Bowman presses.

More research (and math) seems to be next!