t206 eddie plank on ebay..

[g_vezina_c55]

just tried to have the ebay plank for 25K and offer was declined.

[ChiefBenderForever]

What!! Are you saying he turned down 25k for that pos!

[Runscott]

Originally Posted by atx840

PSA 4 - 150 series (20k in 2001)
Auction

I couldn't see a big enough picture of the one you linked to, to really comment, but the following Net 54 discussion involves the only other numerically-graded 150 back that I could find, and it looks like the bottom was trimmed, meaning possibly hand-cut: Net 54 discussion of slabbed 150 Plank

[sb1]

Scott,

That Plank has a story all of it's own, it's seen a couple of different homes and holders. Referring to the PSA 3 in the old thread.

[glchen]

Here's a link to another PSA3 150 Plank: Link

[g_vezina_c55]

Originally Posted by ChiefBenderForever

What!! Are you saying he turned down 25k for that pos!

yes

[Runscott]

Originally Posted by g_vezina_c55

yes

I'm surprised, but it only costs him five cents to keep re-listing it. By the time it reaches $29K in market value and someone bites, he may have lost 120 or so nickels on 30-day auctions.

[g_vezina_c55]

he said he not buy the card at the auction, he said he buy the card in private sale . it is bad , i am verry interested but 29 is a little bit high

[Ease]

Patience, my friend, you will get a nice one for the price you want to pay eventually.

[Runscott]

Originally Posted by Ease

Patience, my friend, you will get a nice one for the price you want to pay eventually.

Agreed. In my opinion, the T206 Plank is one that will go up faster than inflation. I had planned to offer this guy $23K in April, so nice to know that would have been a waste of time.

I think he should keep his car and not compete with me for a cheap pos Plank.

[g_vezina_c55]

i miss this plank a couple years ago
http://www.google.ca/imgres?q=t206+p...OvvXPBw&zoom=1

anybody know where is this plank?

[AndyG09]

I mean no disrespect Mr. Vezina, but each time I read your posts, I can't help but think of Denis Lemieux.

[g_vezina_c55]

sorry for my english, i ll try to do my best. i will stop post.
thx a lot for your help

[AndyG09]

No, no! I don't mean any disrespect at all! I wish you lots of luck on your Plank and hope you find one that fits the bill. I meant no harm.

Best,

Andy

[ChiefBenderForever]

Originally Posted by AndyG09

No, no! I don't mean any disrespect at all! I wish you lots of luck on your Plank and hope you find one that fits the bill. I meant no harm.

Best,

Andy

Jerk !! You are just jealous you can't afford a Plank! And so am I !! In all serious seller might have done you a favor not accepting offer, but at same time I think the next one to hit market in a 2 or 3 is gonna go good $$. Someone mentioned rea was gonna have a couple and that will be soon, could always call them to find out so save your $$$ and get ready!!

[g_vezina_c55]

ok, i will do my best for write corectly, so english is not my first language hehe

[AndyG09]

J, I am real jealous. Of course, I know that is your dream card. Change your name to IWANTAPLANK206FOREVER!
Vezina, I couldn't even attempt your language, so you're doing great in my eyes! I hope you can appreciate Slapshot!

[ChiefBenderForever]

Well if 25k can't get a pos like that then I might as well put my dreams of a 2 or 3 down the toilet, oh the horror.............

[g_vezina_c55]

i loooove slap shoot, in the french version, this movie is amazingly funny with the cdn french traduction...lol

[AndyG09]

There are a million classic lines in Slapshot! Trade me right f#cking now!

[Steve D]

Here's another numerically graded 150 back.

I was the underbidder on it back in 2006 on ebay, at $16,100

Steve

[danmckee]

Steve, this Plank was sold raw at a Hunt's Auction Louisville slugger museum. See the bottom edge, it is trimmed in my opinion and I believe Hunt sold it correctly as trimmed at the time. Dan.

[g_vezina_c55]

i think by the week end, i will post ads on kijiji.ca for sell my car. if i ever afford a plank card i must go ahead with the project hehe, it is a big decision to sell my charger.

[gnaz01]

Originally Posted by danmckee

Steve, this Plank was sold raw at a Hunt's Auction Louisville slugger museum. See the bottom edge, it is trimmed in my opinion and I believe Hunt sold it correctly as trimmed at the time. Dan.

Dan, how can that be, it is graded PSA 3, isn't it?

[Steve D]

Thanks Dan.

I was going through my old scans, and have a couple from 2006. I know that's when an ebay dealer named Big Ed's had a Plank up for auction, and I was the underbidder on it. I took out a loan at my credit union for $16K to try for the card, only to end up as the underbidder. To this very day, I'm still kicking myself in the gluteous maximus for not going any higher, especially considering how that card has risen in price ever since

Here's another scan I have of yet another 150 series Plank:

Steve

[sb1]

The Hunt card is almost undoubtedly hand cut, here is the card sans slab.

https://www.huntauctions.com/live/im...=526&lot_qual=

[Runscott]

Scott, given that we've only seen a few 150 backs slabbed with numbers, and at least one of those shouldn't have been, is it possible that all of them were carefully hand-cut? Perhaps none actually made it to distribution?

[sb1]

No, I think many were distributed, there are enough with uniform factory cuts and nice even wear to think otherwise. Some of the AUT's are actually trimmed and not hand cut, others appear to be handcut.

And it would make no sense for the 150's to be unissued and the 350's distributed, it would have been the other way around, I would think.

[g_vezina_c55]

here is the car i want to sell for afford a plank card ! if anyone might be interested lol

http://quebec.kijiji.ca/c-autos-et-v...AdIdZ353546583

[g_vezina_c55]

anybody have any info about this plank ? i missed this card a couple years ago

[atx840]

It appears to have been reslabbed and sold in 2010 for $17,500 through eBay.

[g_vezina_c55]

oh thanks.. i missed it a couple years ago perhaps in 2007 or 2008... for 7 or 8 K if my memories is good.

[ScottFandango]

Originally Posted by sb1

No, I think many were distributed, there are enough with uniform factory cuts and nice even wear to think otherwise. Some of the AUT's are actually trimmed and not hand cut, others appear to be handcut.

And it would make no sense for the 150's to be unissued and the 350's distributed, it would have been the other way around, I would think.

where is Ted Z when you need him?

[g_vezina_c55]

again
http://cgi.ebay.com/ws/eBayISAPI.dll...n#ht_500wt_966

[ChiefBenderForever]

It is a gorgeous piece of cardboard

[Runscott]

The guy wants to sell this current one, so I'm guessing it shows up somewhere else soon.

Do we have relative population numbers for the tougher T206's (Wagner,Plank,Magie,Doyle,Demmitt St.L,O'Hara St.l) ?

[Abravefan11]

Originally Posted by ChiefBenderForever

It is a gorgeous piece of cardboard

Johnny if you want to see a gorgeous Plank and a couple other nice pieces of cardboard check out the one's we recently posted on the site. Link

[g_vezina_c55]

wow amazing

[ChiefBenderForever]

Originally Posted by Abravefan11

Johnny if you want to see a gorgeous Plank and a couple other nice pieces of cardboard check out the one's we recently posted on the site. Link

Yeah that is sick my guess is it goes for $300 plus juice

[Vegas-guy]

Man if only I could afford any of those!!!!

[e107collector]

Originally Posted by Vegas-guy

Man if only I could afford any of those!!!!

Vegas Guy - me too!!

I was thinking last week if I won the Powerball, all three of those cards would be in my collection. I would guarantee it!!

But since I didn't win, I'll just sit here and drool all over my keyboard.

Tony