|
#1
|
|||
|
|||
t206 in binders?
Posted By: Morrie
Hi, |
#2
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
My solution: |
#3
|
|||
|
|||
t206 in binders?
Posted By: Nathan
Another way I've seen - that is similiar to the picture posted above is top loaders in plastic sheets 4 to a page. I know that'll be several volumes considering how big the set is. That's how I do a majority of my cards as I like to flip thru them without worrying about damaging them if they aren't already graded. |
#4
|
|||
|
|||
t206 in binders?
Posted By: Brian Daniels
nice cards too! |
#5
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
Thanks Brian. |
#6
|
|||
|
|||
t206 in binders?
Posted By: tbob
Morrie- I have certain sets in ultra pro pages; coincidentally, one of those sets is the T206 (also have the T205, T207, E90-1 and the 1910 and 1911 Obak sets in pages). The rest are pretty much slabbed, including all caramel card sets. The cards in the ultra pro pages have stayed safe and free from harm, residing in air-conditioned luxury out of sunlight. |
#7
|
|||
|
|||
t206 in binders?
Posted By: Brian Daniels
seems the binders could get heavy! |
#8
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
If you are referring to my binders Brian, they are a bit heavy. I use good quality archival binders and I store them laying flat (as opposed to standing them upright). That tends to eliminate any weight issues. Also, each binder can hold max 10 pages (40 slabs total). Obviously, doing it this way requires many more albums than if they were unslabbed. but I like it b/c it makes it much easier to look at my slabbed cards than if they were in boxes. |
#9
|
|||
|
|||
t206 in binders?
Posted By: Julie Vognar
each in a Mylar (NOt MYlite! IT's too THIN!) sheaths, in Vario Lighthouse stockpages (completely inert plastic, proteacts from acidity, and--mine have a black center devider--four pockets on each side. You can get clear ones, too, but the black looks so nice. |
#10
|
|||
|
|||
t206 in binders?
Posted By: Anonymous
do they make top loader pages? where u can insert top loaders into the pages? i think that would be a good idea...... |
#11
|
|||
|
|||
t206 in binders?
Posted By: zach
I couldn't agree more with you. I will start buying binders when a sheet comes out that fits toploaders. IMO I dont think just the plastic sheet is enough protection, I want to be able to have a sheet that can fit my cards while still in toploaders. |
#12
|
|||
|
|||
t206 in binders?
Posted By: Adam J. Baxter
Ultra-Pro makes a 4 pocket sheet that's for postcards, but fits toploaders quite nicely. I believe Adam Warshaw once posted about storing his cards this way. |
#13
|
|||
|
|||
t206 in binders?
Posted By: zach
Really ? wowers I am in luck. Does anyone know where to find these ? My local shop doesn't have them thats for sure. |
#14
|
|||
|
|||
t206 in binders?
Posted By: Nathan
Never mind... |
#15
|
|||
|
|||
t206 in binders?
Posted By: James Feagin
Zach, |
#16
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
zach, the sheets that I use for my slabbed cards are the 4 pocket post card sheets by ultra pro. |
#17
|
|||
|
|||
t206 in binders?
Posted By: Morrie
Thanks to all who responded -- the 4-pocket pages seem like the best bet, and I'm going to go hit a show in an hour and see if any of the dealers have any; if not, the internet is my friend. |
#18
|
|||
|
|||
t206 in binders?
Posted By: Dave
If your cards aren't in slabs, Ultra Pro makes 9 pocket sheets. |
#19
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
Dave, |
#20
|
|||
|
|||
t206 in binders?
Posted By: Brian C Daniels
was fooling around with this idea and found that PSA cards do not fit as well in these Ultra pro pages. So does anyone know if there are better fitting pages for PSA slabs to fill binders? |
#21
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
Hey Brian, |
#22
|
|||
|
|||
t206 in binders?
Posted By: Wesley
Ultra-Pro does make rigid sheets specifically for PSA and Beckett holders. The slabs snap right into the sheets. As Josh mentioned, these pages are very very thick. At most you can hold 24 cards in MJ Roop's largest binder. Another problem is that the sheets stick to one another. It was such a hassle to unstick the pages that I gave up using the Ultra-Pro pages and simply gave them away. |
#23
|
|||
|
|||
t206 in binders?
Posted By: Brian C Daniels
The alternative is??? |
#24
|
|||
|
|||
t206 in binders?
Posted By: Josh K.
For what its worth, I never had the problem with pages sticking together that Wes had. I thought the holders worked well (except for their size) - which really is only a problem in that you must use more binders. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MJ Roop binders available | Archive | Everything Else, Football, Non-Sports etc.. B/S/T | 1 | 07-25-2008 12:34 PM |
MJ Roop Binders for Sale - all sold | Archive | Baseball Memorabilia B/S/T | 1 | 12-03-2007 03:13 PM |
vintage photo (or large card) storage - binders? | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 0 | 05-05-2007 12:47 PM |
Ultra-Pro PSA slab pages for binders | Archive | Everything Else, Football, Non-Sports etc.. B/S/T | 2 | 11-03-2006 12:00 PM |
Pages and binders for slabbed cards | Archive | Baseball Memorabilia B/S/T | 1 | 05-10-2005 02:16 PM |