Any One Collect Pins?

[sayhey24]

Hey Howard -- I have five Jello boxes -- In addition to the Robinson, I have Ernie Banks, Milt Pappas, Clete Boyer and Willie Mays. I probably have 6-10 of the 3-card transogram boxes, and a complete or near complete set of the AL single boxes. I also have a nice in-store cardboard advertising sign.

Greg
www.baseballbasement.com

[sayhey24]

Back to pins -- I have shown some of these before, but not in this thread. No rhyme or reason here, just a bunch of pinbacks laid out together.

Greg
www.baseballbasement.com

[seattlerainiers]

Nice group of pins, Greg.

I kinda like the National Association of Professional Baseball Leagues pins, worn by attendees at the NAPBL annual conventions. Here's a batch. Sorry for the crummy pic.

[CobbvLajoie1910]

Originally Posted by ooo-ribay

six freaking ninety five!

I know, right? I had convinced myself I was going to get an email from the seller stating they had "lost it", and had since sold it to someone who had happened to see the completed listing & offered substantially more. I am never that lucky; it was a great mail day when it finally arrived.

Originally Posted by Scott Garner

Nice job, Aaron! I've got to put Haddix on my want list now.
PLMK if you ever would like to sell it.

Thanks, Scott! I will. Given the subject, I nearly dropped you a line to see if you had ever come across an example. All of my usual sources (inc. DrM's book) hadn't turned up anything.

Originally Posted by sayhey24

Love the Harvey Aaron. This thread needs more pin back photos (and more cowbell).

Thanks, Greg! Yes, this thread definitely needs more pics of your collection
I've always loved your website. One of these days, Im going to ante up and make an offer on several of your buttons.

[sayhey24]

Three more --

Greg

[Nashvol]

I've accumulated these over the past few years. Sorry for the lighting issues in my office...

[Scott Garner]

Many thanks to 71Buc Mike for allowing me to add this great early pinback of HOF Jim Palmer to my no-hit pitcher pin collection.

[ooo-ribay]

Originally Posted by Scott Garner

Many thanks to 71Buc Mike for allowing me to add this great early pinback of HOF Jim Palmer to my no-hit pitcher pin collection.

Mike is cool

What's the diameter on that thing?

[Scott Garner]

Originally Posted by ooo-ribay

Mike is cool

What's the diameter on that thing?

I don't have it in hand yet, but I believe it's somewhere between 1 1/4" and 1 1/2" in diameter.

[ooo-ribay]

Originally Posted by Scott Garner

I don't have it in hand yet, but I believe it's somewhere between 1 1/4" and 1 1/2" in diameter.

part of a set, do you think?

[Scott Garner]

Originally Posted by ooo-ribay

part of a set, do you think?

I think so, but I'll know more when I have it in hand.

[71buc]

Originally Posted by Scott Garner

I don't have it in hand yet, but I believe it's somewhere between 1 1/4" and 1 1/2" in diameter.

I shipped it already so I don't have it on hand to measure. However, I think it is actually around 2" to 2 1/4" in diameter. It is in great condition. I am unsure if it is part of a set or not. I absolutely am pleased that I had something Scott could add to his collection as he has helped me out many times.

[Scott Garner]

Originally Posted by 71buc

I shipped it already so I don't have it on hand to measure. However, I think it is actually around 2" to 2 1/4" in diameter. It is in great condition. I am unsure if it is part of a set or not. I absolutely am pleased that I had something Scott could add to his collection as he has helped me out many times.

As Mike correctly stated the Palmer pinback is actually 2 1/4" in diameter. I received it today. No manufacturer info on the pinback to help ID it, but it definitely is vintage.

Many thanks Mike!

[ooo-ribay]

Because of the lack of bidding, I'm assuming no one "liked" this item...1.5" instead of 2.25" and not the usual sepia tone. What are the thoughts of the experts (Al and Paul)?

[batsballsbases]

Originally Posted by ooo-ribay

Because of the lack of bidding, I'm assuming no one "liked" this item...1.5" instead of 2.25" and not the usual sepia tone. What are the thoughts of the experts (Al and Paul)?

Well not everyone didnt like the item. I will let you know what I think when it comes...And yes it is 1 3/4 in size..
I usually dont comment on things that I buy but I wanted to see for my self what it was

[ooo-ribay]

Originally Posted by batsballsbases

Well not everyone didnt like the item. I will let you know what I think when it comes...And yes it is 1 3/4 in size..
I usually dont comment on things that I buy but if it is what it is then it is extremely rare.

Awesome. I was tempted....especially when the seller told me it had a straight pin back....he also told me it was just 1/16 to 1/8 over 1.5".

[autograf]

Seattleraniers..............I have the 1939 NAPBL pinback belonging to Pee Wee Reese.....I'll try to post a photo of it. I collect Reese and loved the 1939 Centennial tie-in, so I had to have it......

[batsballsbases]

Originally Posted by ooo-ribay

Awesome. I was tempted....especially when the seller told me it had a straight pin back....he also told me it was just 1/16 to 1/8 over 1.5".

well the pin came today and and my curiosity is now satisfied Its one of those (Junk) I mean repro pins from an ebay seller pinzplus. Wrecking vintage pins by the way. The person who I got it from also wanted to know if it was real so we worked out that if it wasnt he would refund it. Now we know and the search can continue!

[JMEnglish27]

Originally Posted by sayhey24

And more --

Aha! Someone else with one of those bottle openers. You don't happen to know anything about it, do you? I have one, and have no idea the age, etc.

[ooo-ribay]

Originally Posted by batsballsbases

well the pin came today and and my curiosity is now satisfied Its one of those (Junk) I mean repro pins from an ebay seller pinzplus. Wrecking vintage pins by the way. The person who I got it from also wanted to know if it was real so we worked out that if it wasnt he would refund it. Now we know and the search can continue!

Ah, damn! The seller is a good guy....he recently sent me the wrong pin but then sent the right one, no sweat.

[batsballsbases]

Originally Posted by ooo-ribay

Ah, damn! The seller is a good guy....he recently sent me the wrong pin but then sent the right one, no sweat.

Yes when I told him it was bad I think he was a bit fustrated where he bought it from. Like I told him they even had age spots on the front put in , and that was a hard thing to do. That was one reason I wanted to look at it just to see... Sad but on to the next one!

[icollectDCsports]

Originally Posted by batsballsbases

Yes when I told him it was bad I think he was a bit fustrated where he bought it from. Like I told him they even had age spots on the front put in , and that was a hard thing to do. That was one reason I wanted to look at it just to see... Sad but on to the next one!

Darn repros. Glad you're able to return it without hassle.

[ksfarmboy]

Just got these in and I'm really liking them. Would like to pick up the Robinson boys and Powell someday too if anyone has any they'd be willing to sell.

[Scott Garner]

Originally Posted by ksfarmboy

Just got these in and I'm really liking them. Would like to pick up the Robinson boys and Powell someday too if anyone has any they'd be willing to sell.

Very nice!

[springpin]

As much as I have warned collectors about reproductions, I have paradoxically come to learn that my two pinback books, one on baseball and one on boxing, are contributing to their occurrence. Most recently I am seeing it in boxing pins. They lift the image of a pin straight from my book, and then fashion a reproduction out of it. Through photo-editing techniques they remove surface blemishes and even correct for an original pin being somewhat off-center.

If I had to do it all over again, I would somehow try to present images of the pins in a way that decreased the likelihood that a reproduction could be created from it. When I told this to a professional photographer, I was told there are now more effective methods to overcome deterrents to altering photographic images than there are ways to impose them. The reverse of a pin is more diagnostic of its authenticity than the front. There is also no substitute for knowledge born of experience.

[batsballsbases]

As a little of a follow up on the Willie Mays Pin it did take ebay to get involved in the refund as the seller after a number of emails just never replied to the refund payment. When ebay contacted me about the pin I did have to state that it was a (Fake) or reproduction made from the original. These pins are being reproduced by a person on ebay going by PINZPLUS. To his credit he does sell them as stated reproductions but it people who are now taking them and trying to pawn them off as originals. Now the original is a 2 1/4 inch in size and the one that was bought was 1 3/4 inch in size. Now that would throw up a red flag to most pin collectors but in the world of pin collecting there are different versions coming up once in awhile that do turn out to be the real thing! A case in point Thanks to a board member is this Don Mueller pin. It is 1 3/4 inch in size and with this style pin one would assume that it would be 2 1/4 inch in size. (For the record the Mueller is the real deal) But the Mays 1 3/4 pin was a reproduction. I took a chance just because on the outside chance that it was 1 3/4 inch in size. I can tell you that that mays pin was cheaply made , very thin, had a very small collet edge and really didnt look like it was vintage. Funny thing the age spots seemed to be put on before the pin was covered.. Here is a scan of the real 2 1/4 mays along side of the 1 3/4 mueller..

[perezfan]

I'm looking for a Milw. Braves Pin that's not especially rare.... it just continually eludes me. Whenever I take a break from ebay, it's available, and whenever I'm tuned in, it's not. Anyway, it is pictured below...

http://www.ebay.com/itm/1940-039-s-5...p2047675.l2557


This one sold for $14, which was pretty cheap. There is another one currently in Mears, which is priced at $100. The next bid (with the BP) would take the price over $130 (which is utterly ridiculous).

Bottom line.... I'll pay up to $70 if someone here wants to sell theirs. No ribbons/charms needed. It's typically a $25 - $40 Pin.

Thanks for indulging me

[gnaz01]

Picked this up last month

[Huysmans]

Hey Greg, gorgeous PM1! Where did you find that Mathewson, if you don't mind me asking?

Regards,
Brent

[MK]

Don't think the easel back was on the original. Can anyone confirm?

[ooo-ribay]

Originally Posted by MK

Don't think the easel back was on the original. Can anyone confirm?

here's the listing, to see the back.

http://www.ebay.com/itm/1950s-brookl...p2047675.l2557

I don't know the answer, but I see he also has three other, newer 6" Dodgers pins. The guy has some nice stuff....

[ooo-ribay]

in case you missed it.

http://www.net54baseball.com/showthread.php?t=211347

RIP, Paul.

[71buc]

I picked this one up for a whopping $3.00. Judging by the construction I feel its safe to attribute it to the 1971 team. I had not seen on of these before. When I received it today I was surprised to see the made in Canada marking on the back. Now I am curious what other Canadian versions of 1970's pins may exist. Does anyone have any information on such Canadian manufactured pins?

[ooo-ribay]

I'd say 1971 is a pretty safe bet. I will check my pins of a similar era and/or construction.

[ooo-ribay]

I checked all my likely suspects. Not a one stamped Made in Canada.

Is your pin 3.5 inches? I did notice that only the big ones seem to have that "single wall" construction.

[71buc]

Yes it is 3.5 inches. I have 30 pins from that era and none have the Canadian manufacturing markings.

[btcarfagno]

Just got these in today.

Tom C

[sayhey24]

Tom --

Those look great grouped together like that!


Greg

[ooo-ribay]

^^^^ those are super clean for tin lithos. Any idea why Goose has no insignia on his hat?

[jerrys]

pepsin-dwyer.jpg

sl-pinback.jpg

[D. Broughman]

It's been a while since I seen him
Just remembered it's Mutt from the Mutt & Jeff cartoon.
Dam i'm old!

[ooo-ribay]

Just picked up #4 of the 5 Giants HOF pins...Mize HF38. MK (Mike) has told me there are 40 pins total. He has 37 of the 40 and, like me, is still looking for HF39 Hoyt Wilhelm. Mike has identified 39 of the 40. DOES ANYONE KNOW WHO HF36 MIGHT BE?

[ooo-ribay]

Even if Paul Muchinsky's values were high by a factor of two (as they often are), someone got a good deal here. I think the seller could have done better with a better description.

http://www.ebay.com/itm/VINTAGE-LOT-...vip=true&rt=nc

[mjkm90]

Holy cow pie Batman!!!! I would have paid that for the Jackson pin alone

[Cliff Bowman]

Originally Posted by MK

Great research! All the Cubs I have played between the years 1971 and 1974. Banks last year with the Cubs was 1971. Some however, including Steve Stone, Vic Harris, Bill Madlock and Jerry Morales, didn't arrive with the Cubs until 1974. Apparently they made one of Ron Santo with the Cubs, and then in 1974 another one when he was with the White Sox.

What info I can add to your Cubs pins collection photo, a Billy Williams pin and a Fergie Jenkins pin (misspelled name), and two different pins each of Jose Cardenal and Rick Monday, same photos but each blown up on one of the pins.

[mrmopar]

This is much newer than most of the pins shown, but has anyone seen something like this one?

[ooo-ribay]

Originally Posted by mrmopar

This is much newer than most of the pins shown, but has anyone seen something like this one?

I figured Steve Garvey would want to hire a "date."

[Scott Garner]

Originally Posted by ooo-ribay

I figured Steve Garvey would want to hire a "date."

[effe]

From the 10/14/38 Milwaukee Journal mentioning the sale of the buttons



From the 10/17/38 Milwaukee Journal

[ooo-ribay]

^^^^ I love how you were able to find the "whole story" behind the pin!