|
#1
|
|||
|
|||
Cracking a protective case
Posted By: Bernie
What is the best way to crack a case without damaging the card ? |
#2
|
|||
|
|||
Cracking a protective case
Posted By: Matt
One of the worst ways might be to submerge it in boiling water so that the bond melts apart. |
#3
|
|||
|
|||
Cracking a protective case
Posted By: Shawn
I like to put it the microwave for about 12 - 15 seconds (NO MORE!) that gets the edges brittle where you can easily snap it with pliers. Firm presure applied. This is for SGC holders only, PSA requires another 20 seconds, But I have had mixed results with the PSA slabs... GOOD Luck |
#4
|
|||
|
|||
Cracking a protective case
Posted By: JimB
I have had good success (no damaged cards) by using needlenose pliers to crack off a corner (the one farthest away from the card), and then sliding a knife or screwdriver in to carefully separate the top from the bottom. |
#5
|
|||
|
|||
Cracking a protective case
Posted By: Jason L
as unassailable?! |
#6
|
|||
|
|||
Cracking a protective case
Posted By: Dave F
Hmm. |
#7
|
|||
|
|||
Cracking a protective case
Posted By: leon
Read what JimB said.....works like a charm..... |
#8
|
|||
|
|||
Cracking a protective case
Posted By: John
Shawn is corrct in fact a lot of new models from Sears already have this feature. |
#9
|
|||
|
|||
Cracking a protective case
Posted By: Matt
John - I noticed that BVG is noticeably absent due to the indestructibility of their cases. |
#10
|
|||
|
|||
Cracking a protective case
Posted By: Dave F
15 seconds for SGC and 35 for PSA? maybe Kevin has tried this anyway... |
#11
|
|||
|
|||
Cracking a protective case
Posted By: Al C.risafulli
Dremel tool. |
#12
|
|||
|
|||
Cracking a protective case
Posted By: Frank Wakefield
I suggest you NOT insert anything in between the front and back of the slab, so that the card can slide out. Doing that runs the risk of the card getting bent. A low likelihood, but possible. |
#13
|
|||
|
|||
Cracking a protective case
Posted By: Shawn
Matt, |
#14
|
|||
|
|||
Cracking a protective case
Posted By: Dave F
Thats what I thought Shawn. |
#15
|
|||
|
|||
Cracking a protective case
Posted By: CoreyRS.hanus
Somehow I'm having a hard time imagining somebody putting a multi-thousand $ card in a microwave oven. |
#16
|
|||
|
|||
Cracking a protective case
Posted By: John
I agree Microwave way to silly for me, I only use the “Showtime Rotisserie Card Cracker” I can crack a card and enjoy some delicious slow roasted chicken! |
#17
|
|||
|
|||
Cracking a protective case
Posted By: DMcD
. . the George Foreman Lean Mean Grilling Machine and Slab Buster Outer |
#18
|
|||
|
|||
Cracking a protective case
Posted By: bperry
these funny posts remind me of a funny "happening" in the 80's before grading....a dealer had a card listed in SCD(a 1933 goudey Bengough #1 card)...a faxed picture of the card was requested....I believe this was before scanners became available....well the dealer actually inserted the 1933 Bengough card into the fax machine and pressed send...well you can visualize what happened....I still have a hard time believing anyone could be that %#$%...well it takes all kinds I guess..thanks for reading |
#19
|
|||
|
|||
Cracking a protective case
Posted By: Jeff S.
I've had some PSA holders that shoot a small blast of air from the "welded" seams when you compress the middle with your fingers. Not sure if this is standard as I've only had a few PSAs, but it's safe to say you shouldn't play with them near water |
#20
|
|||
|
|||
Cracking a protective case
|
#21
|
|||
|
|||
Cracking a protective case
Posted By: Doug
I've had the best luck using a box cutter and taking the blade around the seams of the holder until you break through the seal. Then pry at a corner with a small flathead screwdriver and it should pop right open. |
#22
|
|||
|
|||
Cracking a protective case
Posted By: scott levy
I just toss them out of my window at the empire state building and let gravity do the rest. I'm happy to help anyone out that needs my services, just try not to pick a windy day. |
#23
|
|||
|
|||
Cracking a protective case
Posted By: Anonymous
I use a rounded kitchen knife. Works like a charm. The lovely wife doesn't care for it, so I have to be careful that she's not around. |
#24
|
|||
|
|||
I find these processes to be quite interesting.
Does anyone know how PSA or SGC crack these open when a collector sends in a graded card for a re-grade? How do the professionals do it? Cy |
#25
|
||||
|
||||
I had good luck using tin snips to snip off a corner of the case, and then I ran a flat head screw driver along the seal to separate the two halves. I gripped the screw driver down on the shank (and not on the handle) so that only an inch or two of the shaft was sticking out from my hand. That way I couldn't slip and jab the screw driver into the case and card. This technique worked for me for all three cases -- SGC, BVG and PSA
Last edited by David R; 12-05-2009 at 12:39 PM. |
#26
|
||||
|
||||
I have seen SGC open one of their own cases. I'm sure they have multiple methods, but I watched Brian (The World Traveler) Dwyer slide a thin 12 inch metal ruler into the slot along the side of a case, torque it a little bit and it popped right open.
|
#27
|
||||
|
||||
I use the Redneck way I runnum over with my pickem up truck in the back yard.
Last edited by D. Broughman; 09-19-2013 at 06:16 AM. |
#28
|
|||
|
|||
This is by no means the only method, just my method and its one I'm comfortable with. DISCLAIMER: This is offered for entertainment purposes only, and I'm not responsible if you choose to try this and screw up your card.
Camera phone pics so not that good quality (will be in two posts as board will only allow 10 pics per post) |
#29
|
|||
|
|||
|
#30
|
||||
|
||||
That is basically the method I use too. Snap off the corner, insert flat head screwdriver, and VERY CAREFULLY separate the two sides.
JimB |
#31
|
|||
|
|||
I think JimB has the right idea. I put it on a rag or t-shirt and fold it over while I do it so I don't cut myself, because you can if you slip.
|
#32
|
|||
|
|||
Go to Lowes, Home Depot or any other hardware store an buy a hand held plastic cittung tool or plastic cutting blade for your utility knife. Probably around $2.00. Just draw it around the top seams (above the card)
4 or 5 times and you can open it very easily. |
#33
|
||||
|
||||
just did this
I wanted to crack open an SGC case, and searched for cracking slabs advice. I just used this method, and it took less than 1 minute, and I didn't damage the case or the card. Thanks for the advice!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I wonder if I can trade my 87 topps case for this t200 case | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 16 | 01-16-2008 10:46 AM |
Protective Pages for SGC/PSA???? | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 9 | 04-09-2006 06:41 PM |
Cracking a BGS / BVG case | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 21 | 03-15-2006 08:51 AM |
Cracking | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 4 | 12-24-2005 09:24 AM |
a case made for cracking | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 21 | 02-11-2002 07:30 PM |