Hey, pennant guys

[perezfan]

It doesn't really matter if the tassels stick out. But if it bugs you, then you can just tuck them behind the body of the pennant. The plastic sleeve will hold them nicely in place behind the pennant.

When hanging, use tiny brad nails that barely show, and push them through the plastic cover (but not the pennant itself). There should be enough excess space around the perimeter to do that.

An alternative to the tiny nails is to use Velcro behind the pennant. Quite a few people here do that, and it gives the pennant a nice "floating' effect. I personally have not done it, and am not sure how easily the Velcro can be removed from the wall. Perhaps it peels right off, but I would be leery of it pulling off some of the paint. Perhaps others here can comment on that.

Best of luck, whichever route you take!

[vintagebaseballcardguy]

Originally Posted by perezfan

It doesn't really matter if the tassels stick out. But if it bugs you, then you can just tuck them behind the body of the pennant. The plastic sleeve will hold them nicely in place behind the pennant.

When hanging, use tiny brad nails that barely show, and push them through the plastic cover (but not the pennant itself). There should be enough excess space around the perimeter to do that.

An alternative to the tiny nails is to use Velcro behind the pennant. Quite a few people here do that, and it gives the pennant a nice "floating' effect. I personally have not done it, and am not sure how easily the Velcro can be removed from the wall. Perhaps it peels right off, but I would be leery of it pulling off some of the paint. Perhaps others here can comment on that.

Best of luck, whichever route you take!

Mark,

Thanks for the advice. I got to thinking about the tassels sticking out after my post and realized it probably wouldn't matter. Just inexperience with these things on my part. I posted on this thread back around the first of the year but haven't bought any yet. However, I keep coming back to them. So many of them are so pleasing to the eye with the graphics and colors. St. Louis Cardinals pennants would probably be my first target. Anyway, thanks again.

[icollectDCsports]

Originally Posted by perezfan

It doesn't really matter if the tassels stick out. But if it bugs you, then you can just tuck them behind the body of the pennant. The plastic sleeve will hold them nicely in place behind the pennant.

When hanging, use tiny brad nails that barely show, and push them through the plastic cover (but not the pennant itself). There should be enough excess space around the perimeter to do that.

An alternative to the tiny nails is to use Velcro behind the pennant. Quite a few people here do that, and it gives the pennant a nice "floating' effect. I personally have not done it, and am not sure how easily the Velcro can be removed from the wall. Perhaps it peels right off, but I would be leery of it pulling off some of the paint. Perhaps others here can comment on that.

Best of luck, whichever route you take!

When I had some pennants displayed using rigid holders, I used duct tape on the back side of the pennant, near the three points, to secure thumb tacks facing away from the pennant that could then be pushed into the wall using pressure on the front. Suppose it depends on how hard your walls are.

[ooo-ribay]

Originally Posted by icollectDCsports

When I had some pennants displayed using rigid holders, I used duct tape on the back side of the pennant, near the three points, to secure thumb tacks facing away from the pennant that could then be pushed into the wall using pressure on the front. Suppose it depends on how hard your walls are.

I like that idea! You could also hot-glue the tacks to the rigid holder.

One thought on thin holders...some are clear; some are cloudy. I hate the cloudy ones. They might be OK for storage, but not for display, The cloudy ones really dull the colors (which my pics may or may not show).

I only use rigid holders on badly deteriorating pennants. The Cinderella Boys shown is riddled with moth holes. I had to put it in a thin holder to even get it into the rigid one.

[Hankphenom]

Originally Posted by ooo-ribay

I like that idea! You could also hot-glue the tacks to the rigid holder.

One thought on thin holders...some are clear; some are cloudy. I hate the cloudy ones. They might be OK for storage, but not for display, The cloudy ones really dull the colors (which my pics may or may not show).

I only use rigid holders on badly deteriorating pennants. The cinderella Boys shown is riddled with moth holes. I had to put it in a thin holder to even get it into the rigid one.

To get very soft pennants into a rigid holder, I put the pennant on top of one rigid holder, slide them both into another rigid holder as far as they will go, then pull the first rigid holder out from under the pennant and out of the other holder, which leaves the pennant almost all the way in. I then tap the tip gently on the floor to get the pennant the rest of the way into the holder. I've never tried this with a soft holder as the "carrier," but that might work, too. To display on my walls, I use an inch or so of the heavy-duty double-sided tape available at Staples on three points of the back of the rigid holder, then place the pennant where I want it on the wall and press hard on the spots where I can feel tape bulging from the other side. I've had pennants in place for 15 years so far still with the original tape.

[thetahat]

Mine are all in rigid holders, I get them in slowly, even the soft cloth ones, by tapping the holder gently. They are fixed to the wall (cheap paneling) with thumbtacks ... one through the holder (upper left corner) and another at the tip on which the point rests (like on a ledge).

[Fballguy]

I'm a weird pennant collector. I don't have one displayed. They are all tucked away in my "vault". Since space is at a premium, I prefer only the clear, soft ultra pro sleeves.

[Fballguy]

Very cool room Greg. Unfortunately, here in Texas, we don't have basements and every room I'd consider gets way too much light. I'd be worried about fading.