Suggestion on affixing card holders inside display case

[iwantitiwinit]

Originally Posted by ajjohnsonsoxfan

haha. it's actually the cases. They have a groove that's too narrow for the cases which makes them tilt outward toward glass

Step 1 - Drive to Home Depot and purchase some clear silicone and silicone gun.
Step 2 - Take cases out of display.
Step 3 - Take display off of the wall.
Step 4 - Fill the groove with silicone using the applicator gun. The fill should now create a flat surface for the card to rest on.
Step 5 - Wait for the silicone to dry.
Step 6 - Put display back on wall.
Step 7 - Put cards back in display.
Step 8 - If the cards still lean forward, go back to Home Depot and purchase some small circular adhesive felt pads as suggested by a different responder, double or triple them up and adhere them to the 2 lower back corners of the display. This should push the bottom of the display out far enough so that the angle of incidence of the shelves now is severe enough to keep the card holders leaning back.
Step 9 (The most important step of the process!!) - Sit back, crack a Bud, tell your wife to get off your back that you knew all along how to make it work, admire your handiwork and cards.