Original negatives

[obcbeatle]

Originally Posted by steve B

It probably did. I haven't used it in a long time, since the scanner does ok with just having the lid down. At the time I wasn't looking for really nice scans I could enlarge and print, just ones that would allow a bit of enlarging and viewing, or to list on Ebay. Stuff like reading the town on a train station that just wasn't legible. (It wasn't in the scan either, they got depth of focus right for the subject, but the background lost just enough detail) Now I use the 40x magnifier and desk lamp for that.

I've had a couple prints made from old negatives by a photo lab. The easiest is a contact print. I had a 4x5 negative of a bus and driver that came out great. The downside is that the print is only as big as the negative.

To do an enlargement the traditional way they need a carrier for that size film so it can be put in the enlarger. I wanted to get some prints from a 35mm movie film I have , but nobody had the right carrier. One was made for the most common enlarger, but it's expensive and nobody nearby bothered buying one since making stills from 35mm movie film wasn't something they ever got requests for. That might be different in NYC or LA. A good lab might have a carrier for 4x5 since it's a common format. They should all have one for 35mm still film. And since they do wedding photos and stuff like that they're usually very good at not losing negatives.

A good lab can do a lot of enhancement, there are filters to increase contrast, and a few other things. Cropping by masking the photo paper is common, and most can do effects like fade borders or oval image area, or two photos on the same sheet.

Steve B

Thanks for the tips on DIY methods for creating lighting for scanning negatives, i.e. lightbox, flashlight... Interestingly ... I tried the flashlight method: negative on scanner glass with emulsion side down; white paper on top of negative and flashlight on top of paper, but all I get is a white circle after scanning. I guess the light is too bright or the paper is too thick. Also tried adding light above the negative while on the scanner bed (from different angles .. no paper) but again I still get just a white scan like it's too much light, i.e. no scanned image of the negative. Or maybe I'm just doing it wrong :-) Anyway ... I'm going to try to find a photo lab next week to just make a couple prints from these negatives. As an aside ... I can scan the negatives just by laying them on the scanner glass with the lid open and in normal room light, but the scan is a bit dark. Is there an OSX software tool that will flip the negative to positive and maybe allow some touching up? I may be able to get a copy of Photoshop. Just felt like trying this during the weekend, till I can get to a photo lab. Thanks in advance!