Cards loose inside SGC holders?

[SetBuilder]

I just opened my newly graded T206 cards and I noticed that two of the cards appeared to be loose and tilted inside the holder and as I moved them around slightly to correct the problem, one of them got stuck on the side of the placeholder and another started moving diagonally out of the placeholder! I had to tap, tap, tap, the holder many times to get the card back firmly in the placeholder and centered correctly.

One of the cards got dinged in a corner as the card ran up the side of the holder. Horrible.

[vintagerookies51]

I had a card loose in a PSA holder one time. Luckily it was already in poor shape, but I ended up selling it.

[Ronnie73]

I've had cards in SGC holders get between the black insert and the plastic case. After tapping the card loose, it usually shows some edge damage such as a thin layer of the cardboard rolled or lifted up. Seems all holder types have their flaws but BVG tends to keep cards secure and damage free.

[iwantitiwinit]

Got 10 t206's back from SGC a few weeks ago, had the same problem with 4 of them. It was clear the black inserts were too small haven"t gotten around to contacting them but something is up. If those inserts are precut from a supplier they def. shorted them.

[dog*dirt]

My last two submissions had cards that looked like this, a total of 8 that were loose, 5 cards I could tap back in place and 3 cards I could not.

[glchen]

I agree that Beckett has the best holders in terms of securing the card and preventing float or the insert from damaging the edges of the cards.