How do you open a PSA graded Holder?

[carbonrosa]

Hi, I have a couple of graded ticket stubs that I've purchased on ebay. I want to have them framed in a collage to hang on my wall. So question.. How do you open a PSA graded plastic holder without braking it or more importantly opening the plastic older with out damaging the ticket?

[bnorth]

Originally Posted by carbonrosa

Hi, I have a couple of graded ticket stubs that I've purchased on ebay. I want to have them framed in a collage to hang on my wall. So question.. How do you open a PSA graded plastic holder without braking it or more importantly opening the plastic older with out damaging the ticket?

Freezer, brass hammer, and large sharp knife wait you just want to release the imprisoned tickets. LOL

Just take a good knife and put it in the seam at the top of the holder and hit the back of the knife blade with a hammer and it will break the welded seam. Then pry the 2 pieces of plastic apart and rescue the tickets.

[Beatles Guy]

Originally Posted by bnorth

Freezer, brass hammer, and large sharp knife wait you just want to release the imprisoned tickets. LOL

Just take a good knife and put it in the seam at the top of the holder and hit the back of the knife blade with a hammer and it will break the welded seam. Then pry the 2 pieces of plastic apart and rescue the tickets.

What he said. PSA cases are easy to crack. Instead of a knife I use a small screwdriver or else I'd probably cut my fingers off

[Robextend]

Originally Posted by Beatles Guy

What he said. PSA cases are easy to crack. Instead of a knife I use a small screwdriver or else I'd probably cut my fingers off

+1...on both accounts LOL

[ALR-bishop]

I use a bolt cutter...really. Never had a card damaged. Takes 5 seconds.

[cubsfan-budman]

i take a hammer and gently tap all around the edges, cracking the plastic. if you go all the way around, the 2 sides will just come apart. as far as i can tell, there is no chance of harming the slab contents with this method.

[brookdodger55]

I just cracked out 5 cards and 6 exhibits PSA and SCG. Take either needle nose plyers or regular plyers and snap off top right or left corner. Then slide a small
Screwdriver along the edge. Pretty easy. When snipping off corner, do it quick
and fast. Let us know how it works out.

Mike

[Zach Wheat]

I use my chop saw (i.e. miter saw) to slice through all holders. I've liberated 20+ cards with no issues at all - even with the tough Beckett holders.

Might seem like overkill but it works!

Z Wheat

[doug.goodman]

I've used a kitchen knife on hundreds of cards, and a hammer and screw driver on a few of the more complicated ones (like 1956 Topps pins).

But I love the vision that I have in my head of Al with bolt cutters. He has a crazed grin, tossled hair, and there's blood that probably isn't his...

[darkhorse9]

Fold a washcloth over the card (top and bottom). Firmly tap a hammer along the top edge. Take a flathead screwdriver and slide it between the layers of plastic at the tag area and lift up. The case will pop apart.

Although I free ALL my cards from holders I do keep the tags with them to show the previous grading.

[jimjim]

Has anybody cracked open a PSA case containing a HOF plaque postcard? I don't see a seam around the edge. Thanks for the help and Happy Thanksgiving!

[EldoEsq]

I use a dremel with a cut-wheel...very easy

Sent from my SAMSUNG-SM-G930A using Tapatalk

[hysell]

Love these postings, glad I'm not the only person,cutting graded cards free!I"v use most of these,but use the bolt cutters the most?But some collects would think we are nuts?But if something is wild,set it free!Great job guys, keep it up!Rob,

[Harliduck]

Originally Posted by ALR-bishop

I use a bolt cutter...really. Never had a card damaged. Takes 5 seconds.

That's funny...exactly what I do. Bolt cut the top, slip in screwdriver and spread it apart. 100% success, takes a second. PSA by far the easiest. I save the tags too, I have a nice pile.

[scottbdoug]

just watch this...

https://www.youtube.com/watch?v=vN86mNVuFr8