WTB - SGC gaskets for 50s cards

[Bliggity]

This may be a long shot, but I'm looking to buy some SGC gaskets that fit the larger-size cards from the 50s ('53-55 Bowman and '52-56 Topps). I want to use the black gaskets for scanning cards. Need about 6 of them. Or, if you happen to have some low-dollar slabbed SGC cards of the same size, those would work as well, as I can just crack them myself.

Thanks!

[bnorth]

Originally Posted by Bliggity

This may be a long shot, but I'm looking to buy some SGC gaskets that fit the larger-size cards from the 50s ('53-55 Bowman and '52-56 Topps). I want to use the black gaskets for scanning cards. Need about 6 of them. Or, if you happen to have some low-dollar slabbed SGC cards of the same size, those would work as well, as I can just crack them myself.

Thanks!

Another option is to go to any picture framing gallery and have them make you a few out of black matting.

EDIT: With the matting you could get one piece cut the size of your scanner and then have them cut however many card sized openings you want into it. Then you could lay it on your scanner put the cards into the openings and scan them. Then pick up the matting and then your cards and repeat ans many times as you need. It would be much easier than using single gaskets if scanning more than 1 card at a time.

[Neal]

Leave the scanning lid open .... works like a charm

[Bliggity]

Originally Posted by Neal

Leave the scanning lid open .... works like a charm

The gaskets aren't for having a black background...they're for aligning the cards quick & easy so they scan in straight.

Ben - that's a good idea to have one mat cut with all the slots in it. I might try that if I can't round up any gaskets here in the next day or two.

[661fish]

I have 2 of them.