What is the best way to remove residue from a slab?

[Buythatcard]

I am sure that I am not the only one who comes across a graded card that has residue on it's slab from a price sticker. I have always removed the residue with a clean cloth but many times it just spreads the residue evenly along the rubbed area. I've tried window cleaner in the past but that didn't help.
Has anyone found an easy way to take off this residue withour burning a hole thru the slab?

[bbcard1]

The best stuff period is Bestine, but it is pretty toxic if you have kids around and are careless...not horrible, but along the lines of a pretty bad insecticide...you can usually get it at art stores.

There is a product called Goo Gone that you can get at dollar stores which usually does ok. Staying determined is the key.

[Robextend]

Goo-Gone has always worked pretty well for me.

[timzcardz]

Originally Posted by Robextend

Goo-Gone has always worked pretty well for me.

A little vegetable oil will do the trick too, and you probably already have some in the house.

[Buythatcard]

I knew that I would get good advice from fellow members. It sounds like Goo-Gone is worth the try. Now, I just have to find a place that sells it.

[Jim VB]

Originally Posted by Buythatcard

I knew that I would get good advice from fellow members. It sounds like Goo-Gone is worth the try. Now, I just have to find a place that sells it.

You can find it almost anywhere, Lowes, Home Depot, Target, WalMart, any craft or hobby store.

Just be careful what you buy. There are two products which look and sound similar, but are very different. Goo-Gone is a citrus oil based product and works great. Goof-Off is a petroleum based product that does the same type of thing, but it's bad on the plastic slabs and you have to use it outdoors or in your garage or you wipe out the entire household. Skip that one!

[Leon]

Go into your garage and get some WD-40. Use it....It works extremely well. I have a can of it right next to me all of the time. It really makes the ole plastic look good and removes that sticker goo perfectly. Try it and then come back and let us know. I use it all of the time and it works great. The other stuff probably works too...but I already had WD-40.

[quinnsryche]

Goo Gone works like a charm for me everytime. It will even cleanup light scratches sometimes.

[frohme]

Like a previous poster that suggested vegetable oil, here's another suggestion.

Peanut butter (I prefer creamy )...

our moms used it to get bubble gum out of our hair as kids, and it works like a champ for what you want.

Certainly non-toxic, easy to clean up, no unpleasant odors (unless you're a PB hater), and the best part is that is you don't have to worry about liquid running anywhere - it is totally controllable. A tiny (seriously!) dab of PB will take the residue right off, no issues - at least all those I've run into.

I now see that Steve (Ladder7) suggested the same thing.

[Buythatcard]

The peanut butter idea sounds interesting but I am afraid that I might take a bite out of the slab. What would I do if I bit the Wagner T206?