Being the Centering OCD kinda guy that I am - I had to take a measure on this one -
I have always personally used the JRuler Utility to measure borders in Pixels.
On your Aaron - I come up with
Left = 22 Pixels
Right = 19 Pixels
Centering L to R = 53.6/46.4
Top = 29 Pixels
Bottom = 9 Pixels
Centering T to B = 76.3/23.7
So if my measurements are correct then the T/B Centering would be just a tad bit under what their stated requirements are for a 6
Still a great card but I would really question them if it was in a 7 holder
Quote:
Originally Posted by Wid_Conroy
that is a sweet Aaron...
The way centering works for the technical grade, the card has to meet a specific requirement, (with some leeway I'd assume).
A CSG 7 has to be 70/30 or better.
A CSG 6 has to be 75/25 or better.
I am guessing the tools came up with something like this.... I zoomed in /out on the screen a few times and measured... I got slightly better than ~80/20 every time. I think it is too far from 70/30 to get a 7...
corners/edges/surface have way more subjectivity because the grader is applying his opinion to a description.
|