Quote:
Originally Posted by Runscott
It depends on the type of wood, the type of oil and the humidity at the time you apply it. I've found this out the hard way when refinishing old pool cues. If anyone wants to discuss, PM your phone number. I have a buddy with a cue-building shop who specializes in oil finishes (as opposed to spray).
I have a 1910's Ty Cobb decal bat that is in pretty horrible shape, with no trace of decal remaining. When I start the restoration project, I'll keep careful 'before and after' pics. My main concern is how to repair the wood separation in the barrel.
|
Scott--Press on the grain separation with your fingers, if the separation goes back together you can carefully glue back together with a thin viscosity super glue. Let it wick into the wood and hold for a few seconds. Be sure an wipe off any excess before it drys. If the grain won't close you can lightly sand the sharp edges and smooth it a little. Wood filler gets mixed results, mostly bad but can work on occasions.