T206 -- Measurement in inches ?
 

Posted By: <b>three25hits</b><p>I am breaking in a new scanner, and trying to set my image size accordingly.<BR><BR>What is the height in inches of a standard T206?<BR><BR>Thanks

T206 -- Measurement in inches ?
 

Posted By: <b>Dave</b><p>The nominal size (inches) for a T206 is<BR><BR>1 7/16 wide by 2 5/8 tall. <BR><BR>In decimal form, this is<BR><BR>1.4375 x 2.625<BR><BR>Dave<BR>

T206 -- Measurement in inches ?
 

Posted By: <b>Hankron</b><p>That explains all the fakes in my collection. I had thought it 1-7/16 tall by 2 5/8 wide. I had been cutting the topps off the buggers to get them to fit horizontally in the top loaders.

T206 -- Measurement in inches ?
 

Posted By: <b>three25hits</b><p>Thanks for the quick response. <BR><BR>Just going to test how the scans present before resizing the files anymore....<BR><BR><img src="http://home.insightbb.com/~scantland/ebayaboutme/1911_Paul_Strand_Front.jpg">

T206 -- Measurement in inches ?
 

Posted By: <b>jay behrens</b><p>The only problem with what you are doing is that everyone is not going to see them at that size. My monitor is set at 1280 x 1024 and even though I increase my DPI size, your scan will not appear to me at the size you scan it.<BR><BR>Jay

T206 -- Measurement in inches ?
 

Posted By: <b>Lee Behrens</b><p>How can you tell if it works for T206's if you don't use a t206 as an example.. <img src="/images/happy.gif" height=14 width=14>

T206 -- Measurement in inches ?
 

Posted By: <b>dan</b><p>is the Strand dog-eared at the top?

T206 -- Measurement in inches ?
 

Posted By: <b>three25hits</b><p>Didn't think about the DPI issue. I guess I will scan for my settings and let the chips fall where they may.<BR><BR><BR>Dan -- here is a close up of the top two corners. The top right is a touch round but not frayed.<BR><BR><img src="http://home.insightbb.com/~scantland/1911_Paul_Strand_top_corner_close.jpg">