![]() |
Another SGC holder concern with input/opinions needed
I recently picked up a W551 Ruth/Cobb in SGC 80 from Brad (thanks Brad!) on the B/S/T and I have another concern about the SGC holder/gasket. Upon close inspection of the card, which is beautiful...I love it, I noticed that the gasket in the lower right corner seems to have a tiny "tooth" which appears to be hitting the bottom edge of the card and is causing damage to the edge, which although minute, can be seen by the naked eye and is clearly seen using a loop.
My question is should I contact SGC for a re-holder and go through the trouble of sending the card back in even if this offered free of charge or should I just let it be, seeing as how the damage, albeit very minor, is already done? Has anyone else had a similar issue and what did you do? |
Send the holder back
I have had a couple issues over the years with holders and can say SGC is top-notch in addressing problems very quickly.
They have always gone out of their way to assist to make things right. (Thanks Earl!) Gary |
If the damage is already done, I wouldn't take the time to send it back...
|
Quote:
God I hope I'm not gonna be that parent who only sees the "B" on my son's otherwise straight "A" report card. Unfortunately that edge ding that shouldn't be there is all I can see at the moment. |
Quote:
|
Reholdering (SGC)
Last May I asked SGC to reholder a card....reholder only! It came back reholdered AND regraded. Previous grade an 88...new grade 70! The good news is that when contacted they actually PAID me the difference $$!
|
Quote:
|
All times are GMT -6. The time now is 10:25 PM. |