Net54baseball.com Forums

Net54baseball.com Forums (http://www.net54baseball.com/index.php)
-   Postwar Baseball Cards Forum (Pre-1980) (http://www.net54baseball.com/forumdisplay.php?f=7)
-   -   Venezuelan Topps (http://www.net54baseball.com/showthread.php?t=110625)

Archive 01-16-2008 09:09 AM

Venezuelan Topps
 
Posted By: <b>Dave Williams</b><p>Are these the same standard dimensions as regular Topps?<br /><br />I just purchased a 64 Venezuelan on E Bay and it's 1/8<br />short across the top.<br /><br />I can't find dimensions in the Standard Catalog for this<br />year.<br /><br />

Archive 01-17-2008 07:54 PM

Venezuelan Topps
 
Posted By: <b>Dave Hornish</b><p>I would recommend you join this Yahoo Group if you collect Venezuelan cards:<br /><br /><a href="http://groups.yahoo.com/group/toppsvenezuela/" target="_new" rel="nofollow">http://groups.yahoo.com/group/toppsvenezuela/</a>

Archive 01-18-2008 05:13 PM

Venezuelan Topps
 
Posted By: <b>Josh</b><p>1964 cards are supposed to be identical in size to the US cards. There is a bit of size variation (generally no more than 1/16" of an inch) from card to card as the cutting was not done with a whole lot of care, but 1964 is not problematic for cutting issues in general, and 1/8" is an exceptionally large piece of the card missing. You may want to examine the card thoroughly to see if you can find evidence that it was trimmed.<br /><br />Venezuelan cards were subjected to a multitude of conditions that accounts for generally low grades the cards are found in today. It is not uncommon to see a Venezuelan card that has an edge or two poorly hand cut by a pair of scissors. What likely happened with this Brock card is someone enterprising wound up with it, and re-cut the edge(s) that had previously been hacked up by scissors. PSA has limited knowledge about the issue, but seemingly are aware of slight size variations, and has occasionally slabbed cards that are overly short in my opinion.

Archive 01-18-2008 06:02 PM

Venezuelan Topps
 
Posted By: <b>Dave Williams</b><p>Thank you for the input.<br /><br />I don't really collect this issue, I picked<br />up a 64 Lou Brock for my Lou Brock collection,<br />and it was clearly short top to bottom, but<br />I'm not sure that the guy who sold it to me<br />was the one who trimmed it.<br /><br />I got it cheap enough, so I'm keeping it.


All times are GMT -6. The time now is 09:07 AM.