NonSports Forum

Net54baseball.com
Welcome to Net54baseball.com. These forums are devoted to both Pre- and Post- war baseball cards and vintage memorabilia, as well as other sports. There is a separate section for Buying, Selling and Trading - the B/S/T area!! If you write anything concerning a person or company your full name needs to be in your post or obtainable from it. . Contact the moderator at leon@net54baseball.com should you have any questions or concerns. When you click on links to eBay on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network. Enjoy!
Net54baseball.com
Net54baseball.com
T206s on eBay
Babe Ruth Cards on eBay
t206 Ty Cobb on eBay
Ty Cobb Cards on eBay
Lou Gehrig Cards on eBay
Baseball T201-T217 on eBay
Baseball E90-E107 on eBay
T205 Cards on eBay
Baseball Postcards on eBay
Goudey Cards on eBay
Baseball Memorabilia on eBay
Baseball Exhibit Cards on eBay
Baseball Strip Cards on eBay
Baseball Baking Cards on eBay
Sporting News Cards on eBay
Play Ball Cards on eBay
Joe DiMaggio Cards on eBay
Mickey Mantle Cards on eBay
Bowman 1951-1955 on eBay
Football Cards on eBay

Go Back   Net54baseball.com Forums > Net54baseball Postwar Sportscard Forums > Postwar Baseball Cards Forum (Pre-1980)

Reply
 
Thread Tools Display Modes
  #1  
Old 09-25-2011, 11:03 AM
Cardboard Junkie Cardboard Junkie is offline
David Pierson
Banned
 
Join Date: Dec 2010
Location: Kea'au, Hawai'i
Posts: 1,568
Default Question About 52 Topps Printing.

Hey mates! Aloha! My question is.....how were the backs of 52 topps printed? Was it one plate for the red ink and another for the black? How would it be physically possible to print a black star over a red star on the famous Campos card. Would TGP be able to tell if a small black star were stamped on top of a normal red star campos? Once I saw a Campos with a black over red star on the left star not the right? WTF? Please explain. Thanks.
Reply With Quote
  #2  
Old 09-25-2011, 12:09 PM
Brianruns10 Brianruns10 is offline
Member
 
Join Date: Feb 2011
Posts: 343
Default

Yes, two separate plates. If you compare several of the same card, it is possible to slight variances in the alignment, especially the stitches on the baseball which can be a bit all over the place!

The Campos especially, if you compare different examples on ebay and google images, you can make out some where the two layers didn't quite line up, and the correct red star is slightly visible beneath the black overlay.

As for how this occurred, there is a lot of speculation, and I cannot offer much more than that, being not too knowledgeable on the actual process of printing these cards. I think it is safe to say that somehow, on the plate for the black devices, a star was inadvertently added, leading to the black overlay. It would make sense, then, that there are so few Campos black stars...an error like that, I think, would've been caught fairly quickly. A black star where there shouldn't have been any would've probably leaped out on a spot check, and the error would've been corrected.
Reply With Quote
  #3  
Old 09-25-2011, 02:43 PM
Cardboard Junkie Cardboard Junkie is offline
David Pierson
Banned
 
Join Date: Dec 2010
Location: Kea'au, Hawai'i
Posts: 1,568
Default interesting

good hypothosis but i don't think there was much checking done at any level. For example the glaring error of the sain/page cards was easily spotted, and probably brought to topps attention by the players. However the Zernial #31 position is listed as "ontfield" on all versions black (both printings) and red back.(Also the newly discover house yellow tiger error was never caught) I just suspect that under extreme microscopic and scientific examination that the black star Campos's might all be faked? Just thinking out loud. dave.
Reply With Quote
  #4  
Old 09-25-2011, 04:28 PM
ALR-bishop ALR-bishop is offline
Al Richter
Member
 
Join Date: Jun 2009
Location: San Antonio
Posts: 8,947
Default Campos

If it was faked, or could easily be faked, I wonder why there are not a lot more of them. On the House, there do not seem to be many of these either, do you think it was an initial error that was corrected, or a later error/print defect that was corrected. In any even, I am glad I have both of them already. I also have the Campos were the upper left front border, top and side, are missing. That was discussed in SCD not long back. It may be more scarce than the black star

It is interesting the Zernial was never fixed, maybe people were too transfixed by those balls
Reply With Quote
  #5  
Old 09-26-2011, 09:38 PM
Volod Volod is offline
Steve
Member
 
Join Date: Dec 2009
Location: NEOH
Posts: 1,068
Default

Not having given these anomalies much thought, I hope this isn't an irrelevant or naive question, but I wonder if any uncut sheets of 1952 Topps surfaced over the years that happened to include the Campos card. That is, if such a sheet contained a Campos with any of the errors, it would seem extremely strange indeed that no other cards on the sheet were printed with the same error.
Reply With Quote
  #6  
Old 09-27-2011, 06:19 PM
Brianruns10 Brianruns10 is offline
Member
 
Join Date: Feb 2011
Posts: 343
Default

Quote:
Originally Posted by Volod View Post
That is, if such a sheet contained a Campos with any of the errors, it would seem extremely strange indeed that no other cards on the sheet were printed with the same error.
I think it makes perfect sense it would only happen on the Campos. After all, that's the nature of an error: a one time thing, a mistake that made it past initial quality control. If there was more than one instance, than it would suggest intent, which would be very odd.

As is, I think it's a matter of when they were creating the printing plate, the star device from the red layer somehow made it onto the black as well. I'm not sure how...I'll leave that to someone who knows more about the whole printing process.
Reply With Quote
  #7  
Old 09-28-2011, 05:58 AM
toppcat's Avatar
toppcat toppcat is offline
Dave.Horn.ish
Member
 
Join Date: Apr 2009
Posts: 2,800
Default

Quote:
Originally Posted by Brianruns10 View Post
I think it makes perfect sense it would only happen on the Campos. After all, that's the nature of an error: a one time thing, a mistake that made it past initial quality control. If there was more than one instance, than it would suggest intent, which would be very odd.

As is, I think it's a matter of when they were creating the printing plate, the star device from the red layer somehow made it onto the black as well. I'm not sure how...I'll leave that to someone who knows more about the whole printing process.

Masking error?
Reply With Quote
  #8  
Old 09-29-2011, 10:36 AM
steve B steve B is offline
Steve Birmingham
Member
 
Join Date: Sep 2009
Location: eastern Mass.
Posts: 8,087
Default

Quote:
Originally Posted by toppcat View Post
Masking error?
Most likely.

There would be original art, probably a pasteup for the whole sheet.
That would have been photographed by a very large camera that made a sheet size negative.
Then opaque paper would be used to make a mask to block out the parts not desired in a particular color.
Those would be used to expose the plates.

So if the mask was torn a bit or made wrong, the star would have been exposed and the plate would print a black star.

Repairing that error would be as simple as applying a bit of opaque tape over the star, or taping down the torn bit. It could even be corrected directly on the plate with a special limestone crayon.

Correcting the Zernial woud require at the least a small portion of new original art, a new negative -Either complete or a small piece spliced in, a new mask if it wasn't spliced, and a new plate. Lots of work.

Steve B
Reply With Quote
  #9  
Old 09-29-2011, 11:01 AM
ALR-bishop ALR-bishop is offline
Al Richter
Member
 
Join Date: Jun 2009
Location: San Antonio
Posts: 8,947
Default Printing Info

Thanks for the input Steve
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 06:24 PM.


ebay GSB