Case Cracking Failure: Darn you PSA

[shernan30]

Have you ever dinged a card while cracking a case?

Guess what, I did today

Very depressing

For those wondering, I prefer my cards raw, but sometimes only graded examples are available. Therefore I crack the cases when adding to my set. SGC are not that difficult, but I knew one day PSA would get me good.

[Econteachert205]

Been there. It sucks. I watched some videos to improve my technique. Don't think it will happen again

[KCRfan1]

Originally Posted by shernan30

Have you ever dinged a card while cracking a case?

Guess what, I did today

Very depressing

For those wondering, I prefer my cards raw, but sometimes only graded examples are available. Therefore I crack the cases when adding to my set. SGC are not that difficult, but I knew one day PSA would get me good.

Steve, did you crack the new case or an old one? The new cases look very difficult to crack, and I doubt that I will ever try it.

[shernan30]

It was a new one.


Sent from my iPhone using Tapatalk

[Luke]

Sorry to hear that

I always worry about it happening.

[refz]

I never had an issue with the psa holders. Sgc and the old Gai ones took a little more effort for me.

[KCRfan1]

Originally Posted by shernan30

It was a new one.


Sent from my iPhone using Tapatalk

Sorry Steve.

[gnaz01]

BVG's are almost impossible

[Sean1125]

Hammer + Flathead Screwdriver is the way to go.

Chip the top corner off /w pliers or the screwdriver (hammer at an angle) and simply leverage the rest of the case, it should pop any of them including BGS.

[glynparson]

that is the way to do it. Take your time and you'll be fine. That said I rushed on a Rose rookie PSA 8 one time and the screwdriver slipped and ran across the whole back of the card.

[vthobby]

Originally Posted by gnaz01

BVG's are almost impossible

Greg, for me Beckett holders are actually the easiest for a couple of reasons: For one their older cards are in a protective sleeve which gives me a bit more confidence. As mentioned before, a hammer and flat head are all you need....and of course...a little liquid courage!

Flat head at top seam and smash it.....preferably on concrete floor in your garage (so the flying plastic shards do not impale your family while watching TV!)

Same motion a few times at the top seam to make sure it blasts away. Then with the flat head, I just gently pry the 2 pieces apart and gently pull them apart with my 2 hands when I can grab them.

Sounds crazy and shaky but I have never damaged a card. PSA and SGC are fine also but I always do worry when the card is not in a protective sleeve like on BVG cards but still never hurt a card..........."knock on wood"

Peace, Mik

[conor912]

[QUOTE=vtgmsc;1317223]Flat head at top seam and smash it.....preferably on concrete floor in your garage (so the flying plastic shards do not impale your family while watching TV!)
QUOTE]

+1

I wont's crack BVG slabs without goggles anymore. I seriously came within a millimeter of impaling my eyeball with slab shrapnel once.

[vthobby]

[QUOTE=conor912;1317227]

Originally Posted by vtgmsc

Flat head at top seam and smash it.....preferably on concrete floor in your garage (so the flying plastic shards do not impale your family while watching TV!)
QUOTE]

+1

I wont's crack BVG slabs without goggles anymore. I seriously came within a millimeter of impaling my eyeball with slab shrapnel once.

Okay..... that is my first +1 which begs a couple of questions.......can you get a -1 at all thereby reducing you back to ZERO? and......what web site do I go to and shop for goodies with my +1...you know like a credit card reward web site?

Not trying to be a weirdo here but I'm giving you back a plus 1 for the goggles quote.....SO TRUE! +1 back at ya!

peace,
mik

[DHogan]

I have never tried to free a card from a holder. But, has anyone tried putting one in or on dry ice for a bit and then try to free the card ? Not long enough to freeze the card it self. I have a few graded cards. I'm one of the buy the card not the grade types. I know one or two other ways to use dry ice. We won't got there today.