Scanner

[The Nasty Nati]

My Canon 5600F unfortunately no longer works with the software on my new Macbook.

Any suggestions on a new flatbed scanner great for scanning cards that works with Mac (macOS Monterey or newer)?

[chadeast]

Make sure it's a CCD scanner. The cheap ones are not, those are the scans you see with the cards out of focus (depth of field problem on cheap ones). You'll probably find a lot of recommendations for Epson V series if you search the forum. I have an Epson V600 connected to an iMac and it scans wonderfully, never had a problem. You can see some of the scans in the link in my sig if you'd like.

[Snowman]

Epson V600 here as well. MacBook Pro. Works great!

[Rad_Hazard]

Epson V300 with a Windows PC and it's been great for years.

[Casey2296]

Thank the baseball gods this wasn't another scammer thread. V600 works great for me.

[EddieP]

Originally Posted by Casey2296

Thank the baseball gods this wasn't another scammer thread. V600 works great for me.

Well, it depends. It is a scam on Apple’s part by making old peripherals obsolete on new software

[SAllen2556]

Originally Posted by EddieP

Well, it depends. It is a scam on Apple’s part by making old peripherals obsolete on new software

Yep. I had a Canon scanner that I used for scanning 4 x 5 negatives that eventually became incompatible with my Mac. It was cheaper to buy an old Mac off ebay that was compatible to the Canon rather than buy a new scanner that could do 4 x 5 negatives.

[bobbyw8469]

I am following this as well. I have an Epson V30. It's old (by technology standards), but works great on PSA cards. For SGC cards it's a different story. It makes them all look dirty and trashy. With a ton of lint in the background, even with the "lint filter" turned on. Can anyone recommend a scanner that does great with both PSA and SGC?

[Leon]

I use a Canon 5600F. It works great.

[bobbyw8469]

Leon....not sure if you would know this or not, but is the bed also big enough for a CGC graded comic book?

[Leon]

Originally Posted by bobbyw8469

Leon....not sure if you would know this or not, but is the bed also big enough for a CGC graded comic book?

The bed is 12 x 8 so it might not be, I am not sure. I don't collect comics .

.

[D. Bergin]

Epson V700 here.

If you like your Canon 5600F you might want to look into "Silverfast 8" scanner software and see if it can integrate with your Canon. Might cost a few bucks, but cheaper then buying a newer competent scanner.

A few years ago, my Epson scanner software stopped working for me after my Windows PC did an update. Couldn't get it to work for anything. Thought I'd have to trash my Epson, that I loved.

Found the Silverfast program and have been using it ever since. My Epson drivers eventually updated to the point I could use my Epson software again, over a year later or so, but I found the Silverfast software superior to it and never went back.

[Aquarian Sports Cards]

Originally Posted by bobbyw8469

Leon....not sure if you would know this or not, but is the bed also big enough for a CGC graded comic book?

no, not big enough for a CGC slab

[BobbyStrawberry]

Originally Posted by Casey2296

Thank the baseball gods this wasn't another scammer thread. V600 works great for me.

+1 on the V600. Mac user here

[Fuddjcal]

Originally Posted by bobbyw8469

I am following this as well. I have an Epson V30. It's old (by technology standards), but works great on PSA cards. For SGC cards it's a different story. It makes them all look dirty and trashy. With a ton of lint in the background, even with the "lint filter" turned on. Can anyone recommend a scanner that does great with both PSA and SGC?

I bought a Epson V600 a few years ago and followed the tutorial from another board member. Very Happy with the results for all the cards encased and raw.

https://drive.google.com/file/d/1Eum...gFVdzjffp/view

It is pretty big and was a little hard to find as they were out of stock at many retailers. I only use it for cards and keep it under my desk and only pull it out when I use it.

[RL]

I have a Mac and a epson V600

amazon has it priced at 269.99 for now

[The Nasty Nati]

Does anybody have a V700 with macOS Monterey software (or newer)? I just want to make sure I don't end up getting the V700 and it doesn't work with my current computer.

And maybe I'll try the Silverfast 6 with my current Canon 5600f.
Just a bummer, I love the 5600f but Apple's software update just no longer allows me to use it.

[npa589]

I had an Epson V30 (I think) previously, but it broke within 2 years. I've had a Canon 9000F Mark II for 4 or so years and it's awesome.

I still even have the original protective plastic on top, because I'm similar to Raymond's mom on Everybody Loves Raymond. I figure it will prevent dust from getting into the electrical!

Edited to add that I purchased the 9000F in 2018 for $169.99 before tax. Glad I bought in 2018!

[The Nasty Nati]

Can anybody confirm that their scanners work for MacOS Monterey?

[Casey2296]

Originally Posted by The Nasty Nati

Can anybody confirm that their scanners work for MacOS Monterey?

Looks like Epson supports it.
https://epson.com/Support/wa00928

[RL]

Originally Posted by The Nasty Nati

Can anybody confirm that their scanners work for MacOS Monterey?

I have a iMac with Monterey 12.5 and a epson V600, I can confirm it works

[Leon]

My new, cheap HP printer-scanner just isn't up for doing quality scans.
Does anyone know if the V600 works well with Windows 11? I am reading it has some issues of having to have the Win 11 drivers loaded each time you use it? Or is there a great scanner that works great with Win 11?
thanks in advance

[raulus]

Originally Posted by Leon

My new, cheap HP printer-scanner just isn't up for doing quality scans.
Does anyone know if the V600 works well with Windows 11? I am reading it has some issues of having to have the Win 11 drivers loaded each time you use it? Or is there a great scanner that works great with Win 11?
thanks in advance

Hi Leon:

Can't speak to the V600, although it does seem very popular amongst a lot of posters.

I bought this scanner about 6 months ago:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

A few observations:

No issues with windows 11.
It does a good job of scanning depth. So the backs of your graded items end up sharp and not fuzzy.
The scanning area is big, so you can fit really large items, including PSA jumbo holders.

About the only drawback is that it's massive. So if real estate is at a premium in your place, then this might not be a good fit. And while it's not cheap, it's certainly a lot less than some of the scanners out there that run $4k.

I've been scanning a lot of my items and uploading them to PSA, so if you want to check out the results, here is my master mays set album, which should give you a pretty good idea:

https://www.psacard.com/psasetregist...t/album/290520

[Leon]

Originally Posted by raulus

Hi Leon:

Can't speak to the V600, although it does seem very popular amongst a lot of posters.

I bought this scanner about 6 months ago:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

A few observations:

No issues with windows 11.
It does a good job of scanning depth. So the backs of your graded items end up sharp and not fuzzy.
The scanning area is big, so you can fit really large items, including PSA jumbo holders.

About the only drawback is that it's massive. So if real estate is at a premium in your place, then this might not be a good fit. And while it's not cheap, it's certainly a lot less than some of the scanners out there that run $4k.

I've been scanning a lot of my items and uploading them to PSA, so if you want to check out the results, here is my master mays set album, which should give you a pretty good idea:

https://www.psacard.com/psasetregist...t/album/290520

Space isn't an issue but that one could be a bit of an overkill for me.
.

[Ben Yourg]

Epson Perfection V370

[Leon]

Originally Posted by Ben Yourg

Epson Perfection V370

Thanks. I am pretty sure the V600 replaced this one, or at least, this one is 4 yrs old. I am probably going to just get a V600 and deal with any Win11 issues that might come up.

Thanks!

edited to add it looks like all of the Epson scanners, with this medium-type specs, have been around a few years or more....we'll see.
.

[Robextend]

+1 for EPSON V600

[bammerbb]

Hi Leon,

I have an Epson Perfection V600 scanner and I would not give it up for all the money in the world. I went to their website and I'm getting mixed messages about compatibility with Win 11. I would strongly suggest calling Epson (they have a 1-800 number and talk to a live tech about it. You might be surprised.

Brian

[Aquarian Sports Cards]

.

[D. Bergin]

Originally Posted by Leon

Thanks. I am pretty sure the V600 replaced this one, or at least, this one is 4 yrs old. I am probably going to just get a V600 and deal with any Win11 issues that might come up.

Thanks!

edited to add it looks like all of the Epson scanners, with this medium-type specs, have been around a few years or more....we'll see.
.

If you spring for the Epson and it doesn't work with your Windows version, just get the Silverfast software I mentioned above. I think it's better then the Epson software that comes in the box anyways.

[D. Bergin]

Originally Posted by raulus

Hi Leon:

Can't speak to the V600, although it does seem very popular amongst a lot of posters.

I bought this scanner about 6 months ago:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

A few observations:

No issues with windows 11.
It does a good job of scanning depth. So the backs of your graded items end up sharp and not fuzzy.
The scanning area is big, so you can fit really large items, including PSA jumbo holders.

About the only drawback is that it's massive. So if real estate is at a premium in your place, then this might not be a good fit. And while it's not cheap, it's certainly a lot less than some of the scanners out there that run $4k.

I've been scanning a lot of my items and uploading them to PSA, so if you want to check out the results, here is my master mays set album, which should give you a pretty good idea:

https://www.psacard.com/psasetregist...t/album/290520

That's a very interesting scanner, and a pretty awesome collection.

I may have to keep it in mind should my V700 ever crap the bed. I've always wanted a scanner bed that big, but they were always cost prohibitive at anything above a standard 81/2" x 11" or so. While that's not cheap, it's way cheaper then when I was looking at large format scanners several years ago.

[raulus]

Originally Posted by D. Bergin

That's a very interesting scanner, and a pretty awesome collection.

I may have to keep it in mind should my V700 ever crap the bed. I've always wanted a scanner bed that big, but they were always cost prohibitive at anything above a standard 81/2" x 11" or so. While that's not cheap, it's way cheaper then when I was looking at large format scanners several years ago.

Thanks. The biggest issue for me was definitely being able to scan larger format items. That and items with any depth always ended up fuzzy on my combo printer/scanner.

[Leon]

Generally speaking, "everyone" isn't wrong. I put a V600 on order a few days ago...thanks for the suggestions!
.

[Leon]

V600. Good suggestion. Seems to work very well....

[Wanaselja]

Quick question - I just grabbed a V600 and plan to scan and then post my T206 HOF portraits. Admittedly I haven’t tinkered around too much but was wondering how members get a black background to show through their PSA slabs so the contrast between PSA and SGC isn’t so stark. Is it a setting or simply using black paper? Thanks in advance.

[Casey2296]

Originally Posted by Wanaselja

Quick question - I just grabbed a V600 and plan to scan and then post my T206 HOF portraits. Admittedly I haven’t tinkered around too much but was wondering how members get a black background to show through their PSA slabs so the contrast between PSA and SGC isn’t so stark. Is it a setting or simply using black paper? Thanks in advance.

I just removed the cover of a black vinyl spiral note book and use that, durable and covers the whole scanner bed.

[Wanaselja]

Originally Posted by Casey2296

I just removed the cover of a black vinyl spiral note book and use that, durable and covers the whole scanner bed.

Excellent. Thank you Phil!

[raulus]

Originally Posted by Wanaselja

Quick question - I just grabbed a V600 and plan to scan and then post my T206 HOF portraits. Admittedly I haven’t tinkered around too much but was wondering how members get a black background to show through their PSA slabs so the contrast between PSA and SGC isn’t so stark. Is it a setting or simply using black paper? Thanks in advance.

Another option is just to leave the lid open. As long as you don’t have a lot of light flooding the room, the background on my scanner comes though as black that way. With my scanner, I seem to get even better results than when I use a background. You’d have to try it out to see whether it works with yours too.

[Wanaselja]

Originally Posted by raulus

Another option is just to leave the lid open. As long as you don’t have a lot of light flooding the room, the background on my scanner comes though as black that way. With my scanner, I seem to get even better results than when I use a background. You’d have to try it out to see whether it works with yours too.

This worked. Thank you.

[thecatspajamas]

Originally Posted by The Nasty Nati

My Canon 5600F unfortunately no longer works with the software on my new Macbook.

If you're happy with your old scanner, rather than buying a new one, check out Vuescan scanning software. Their main hook is that they maintain and update drivers for darn near every piece of scanning hardware and enable them to work with current OS's, both for Windows and macOS (and Linux).

And it's got a LOT more settings that you can adjust and tweak to get the most out of your hardware than any out-of-the box scanning software I've seen bundled with any scanner. I've gone through several versions of Windows, and several models of scanners, and still going strong. The only time I've had to discard a scanner was when I literally wore it out.

Currently have running a Canon CannoScan 9000 as my go-to for photos, comics, and anything with depth to it, but am also set up with a Nikon SuperCoolscan 5000 for 35mm film, an Epson V700 for larger film, and a Mustek A3 for larger-than-8.5x11 flat items (doesn't do depth well though), and able to switch seamlessly between scanners and media type by saved settings within the software.

If you're concerned one of the highly-recommended scanner models won't work with your computer, or your OS has updated and no longer supports your old tech, it's worth checking out. They have a trial version that puts a watermark in the scan but should allow you to test your setup, and if you do buy it, it's a lifetime license that is reusable as you move on to other computers and/or scanners.

[JustinD]

On the same topic, do any of these recommendations have Bluetooth capabilities?

I know it’s petty but I prefer to move to completely cordless like my printer for any accessories. They just are a pain in the a**.

[Lucas00]

Originally Posted by JustinD

On the same topic, do any of these recommendations have Bluetooth capabilities?

I know it’s petty but I prefer to move to completely cordless like my printer for any accessories. They just are a pain in the a**.

+1

Looking for a high quality scanner that can send the scans to my phone via WiFi/bluetooth. Not interested in fiddling with a PC or Mac when I only ever use my phone anyway.

Don't think this exists for some reason?

[Lucas00]

If I could ask a small favor testing something for me that would be amazing.

Any folks who use a scanner with WiFi capabilities and have an Android phone could you please download the app "Mopria Scan" and test to see if you're able to scan an item and it sends to your phone?

Would be seriously appreciated.

[insidethewrapper]

None of my scanners work with my new desktop computer with windows 11. When I buy a new scanner will the outside box state if compatible with Windows 11 ? I'm a computer nerd. Don't know anything about other software programs like Silverfast etc. Please I need help. thanks

[Tabe]

Originally Posted by insidethewrapper

None of my scanners work with my new desktop computer with windows 11. When I buy a new scanner will the outside box state if compatible with Windows 11 ? I'm a computer nerd. Don't know anything about other software programs like Silverfast etc. Please I need help. thanks

What scanners do you have? What version of Windows did you have before? It's pretty unusual for recent hardware to not work with Windows 11.

[insidethewrapper]

Scanners were : CanoScan 8800F and Epson FastFoto FF640. The computer I think I had was Windows Vista ( ??) , not sure. Had it for a few years and worked great until Windows 11.

[jp1216]

It's 2024. Replace my old PC with a newer one with Windows 11.
Everything works except my old Canon 5600F scanner. New drivers not supported etc. Without buying a new scanner - anyone have ideas? Secret drivers/software? Vuescan? My editing software works but my scanner isn't recognized.
Ideas? Suggestions?

[Leon]

Same issue here a year or two ago....had a 5600F and went to Windows 11 (and a new pc)...I never got it to work right.

my suggestion is a new Epson V600 photo....worth every penny...
.

Originally Posted by jp1216

It's 2024. Replace my old PC with a newer one with Windows 11.
Everything works except my old Canon 5600F scanner. New drivers not supported etc. Without buying a new scanner - anyone have ideas? Secret drivers/software? Vuescan? My editing software works but my scanner isn't recognized.
Ideas? Suggestions?

[thecatspajamas]

VueScan software is your best bet to keeping your old scanner hardware working with your new OS upgrades. Also provides a uniform interface when working with different scanners without being dependent on whatever the manufacturer included in the box. Well worth the low buy-in for the software.

[jp1216]

Originally Posted by thecatspajamas

VueScan software is your best bet to keeping your old scanner hardware working with your new OS upgrades. Also provides a uniform interface when working with different scanners without being dependent on whatever the manufacturer included in the box. Well worth the low buy-in for the software.

$330 for the V600. I'm leaning towards trying VueScan. I like my 5600F....
I may try it out.

That took 5 minutes. VueScan trial software woke up my dead 5600F and works. $25 option may be worth it - for me.