Quote:
Originally Posted by Peter_Spaeth
In the hobby I grew up in, trimming an oversized (or pressed out and therefore oversized) card down to spec was never viewed as legitimate. Either edges are factory or they aren't.
|
I think you've touched on why this is such a difficult and nuanced topic with your last sentence, and why many would argue that it isn't as cut and dry as some would like or believe it to be. It may be true that a card's edges are either factory cut or they aren't, but that fact isn't helpful. In the real world, this is generally both unknown and unknowable. It cannot be assumed that a card's edges are factory cut.
This also touches on why PSA does not, and surely cannot, if they wish to remain in business, honor a grade guarantee for cards that do not bare actual observable evidence of trimming regardless of whether or not someone on Blowout believes they've found before and after scans of the card in question.
In the real world, we have to deal with observable evidence and make determinations about the likelihood of a card's edges being factory cut or not. Ultimately, this is what determines a card's market value; whether or not it bares evidence of trimming, not whether or not it has in fact been trimmed. This is true in both directions. You can open a brand new pack of cards and receive one with a botched edge from factory that the TPGs will not grade because the card bares evidence of having been "trimmed" despite the fact that it came that way from the factory. It is not unfair or disingenuous to point out that all cards have been trimmed by a blade.
Unfortunately, what determines a card's actual market value is not whether or not it has a factory edge, but rather whether or not its edges appear "correct". This is why some factory cut cards get rejected and why many trimmed cards do not. A card's edge looks "trimmed" or "wrong" when it looks botched, either by an amateur trimmer or by a factory mishap. The idea that all factory edges look a particular way and that all trimmed edges look a different way is simply not true, and one that is born out of ignorance. It is also not true that factory cut cards measure 2.5" x 3.5" and that trimmed cards are by definition smaller than that. Again, ignorance and faulty assumptions beget that belief.
When one of these professional trimmers trims a card, and that card still measures within spec, the resulting card does not have a loss of value on the open market because it does not bare any actual evidence of trimming (i.e., the edges look correct), and the actualized market values are based entirely on what can be observed, not on that which is unknowable. This is also why PSA rejects grade guarantees for a lot of these cards that get called out on Blowout and sent back in for review. They simply bare no physical evidence of trimming. The edges look correct and the card measures correctly as well. Any buyer of one of these cards could crack it out and resubmit it and receive a numeric grade again from any TPG at any time. They are not actually out any money. It's difficult to make a case for fraud when the buyer's bottom line has not actually been adversely affected.