FYI one thing people should be aware of who might have gotten PSA graded W600's last night(or anywhere else), the holders are pressed down very tightly, especially on the slightly thicker and textured surface type 4's. Many of the cabinets have shifted during mailing/shipping and were stuck to the front of the holder, then shifted, thus peeling the top layer of stock off on the edges.
DO NOT TRY TO TAP THEM BACK IN PLACE OR YOU RISK FURTHER DAMAGE.
They really need to be either reholdered with the mylar insert or freed entirely.
If you look as scans you can see where the cabinet originally rested and left traces of it's stock, which resulted in bare areas on the borders when it moved.
Last edited by sb1; 05-13-2022 at 04:57 PM.
|