PDA

View Full Version : w575-1 handcut with jagged edges


Leon
03-12-2015, 03:50 PM
I don't remember seeing very many, if any, W575-1's that have this kind of "tear" on their top and bottom borders. Have ya'll? (nice card by the way)

http://www.ebay.com/itm/1921-22-W575-1-Harry-Hooper-PSA-6-/160646013534?pt=LH_DefaultDomain_0&hash=item25673fa25e

.

nolemmings
03-12-2015, 04:15 PM
Yes, they're out there. Rhett probably has some and I've seen a few I believe posted here. Same with w501, as one printing of w575-1 was on thinner or at least slightly different stock.

paul
03-12-2015, 07:29 PM
I posted the same question about those several years ago when I saw dozens of graded examples at a single dealer table. I'm still not sure how they got that way.

rhettyeakley
03-12-2015, 09:01 PM
These are what I had in the past called W575-1B , more recently however I have taken to calling them W501 Type 2's (as I believe that to be a more accurate description of what these are). They are on the exact same stock as W501 cards (thin and cheap), they have the same "grainy" photo quality as W501's, and they share the same checklist as well, the only difference being that they are missing the card number and "G-4-22" line at top. Also just like W501 cards they came in vertical strips and can be found with the "tear" lines at top and bottom or simply hand cut a the top and bottom but the sides have always ben machine cut. They are definitely tougher than the regular W501 cards but it is hard to know by how many times.

Here are some of mine...
http://www.starsofthediamond.com/w575speaker2.JPG http://www.starsofthediamond.com/w575alexander2.JPG http://www.starsofthediamond.com/w5751bsouthworth.JPG http://www.starsofthediamond.com/w575roush2.JPG http://www.starsofthediamond.com/w575faber2.JPG

You can find the regular W501 cards on occasion with the same "tear separation" at top and bottom as well...
http://www.starsofthediamond.com/w501holkeportrait.JPG

rhettyeakley
03-12-2015, 09:04 PM
It is my opinion that the "torn" look is due to how the cards were likely distributed. The possibly came in a large roll and pulled out like tape from a dispenser and the person simply tore them against a slightly sharp edge which resulted in the "torn" look... similar to how we get tape out of a tape dispenser.

nolemmings
03-12-2015, 09:48 PM
Here's one posted by a board member some time back. Note the descended "u" in Pittsburgh-- I don't recall seeing that on the other sets.
http://www.net54baseball.com/attachment.php?attachmentid=110365&d=1376707166

oaks1912
03-12-2015, 10:13 PM
Rhett...I tend to agree. There are two distinct styles of W-501...with and without numbers...I cannot determine the paper finish inside the slab, but 501's, while similar to 575's, tend to have a slightly more screened finish

ValKehl
03-12-2015, 10:41 PM
For comparison, here are the W501-1, the W501-2, and the W575-1 cards of Sam Rice - the "grainy" photo quality of the W501s in comparison the the W575-1 that Rhett mentioned is easy to see:

kmac32
03-13-2015, 12:24 AM
I have a W575-1 Elmer Miller that appears the same way. Looks different than my other W575-1 of him and the printing is grainier than the others