ReefBlue
08-29-2013, 09:17 AM
Articles I read says they were relatively thick. But then under size specifications, they seem to only indicate length and width.
Has anyone put a set of digital calipers to a few of them to come up with a typical thickness?
bnorth
08-29-2013, 10:50 AM
I am new to the T206's so that was the first thing I done when I started buying them. The nicer VG-EX cards are 0.013, Poor cards usually measure 0.012, and beaters without paper loss are in the 0.011 range. I assume the differences are from wear and tear on the cards.
hangman62
08-29-2013, 11:21 AM
Im selling a quality micrometer ( 0 to 1 inch range) if anyone is interetsed
steve B
08-29-2013, 01:56 PM
I am new to the T206's so that was the first thing I done when I started buying them. The nicer VG-EX cards are 0.013, Poor cards usually measure 0.012, and beaters without paper loss are in the 0.011 range. I assume the differences are from wear and tear on the cards.
Yes, that's the typical range. I measured around 50, and most were .012
Steve B